您要查找的是不是:
- Busbar output terminal for cable connection. 出线铜牌接线座。
- The current flows out of the output terminal. 电流从输出电极流出。
- output terminal connection 输出端子连接
- This is the output terminal of a thin film transistor (TFT). 这是末端一只薄膜晶体三极管的生产(TFT).
- The specified terminal connection driver is invalid. 指定的终端连接驱动程序无效。
- The Terminal Connection driver %1 was not found in the system path. 在系统路径上没有找到终端连接驱动程序%251。
- A close operation is pending on the Terminal Connection. 一个封闭式操作在等待终端连接。
- Connect the speaker system to the speaker output terminals of an amplifier. 将扬声器系统连接到一个放大器的扬声器输出端子。
- The Client Drive Mapping Service Has Disconnected on Terminal Connection. 已在终端连接上中断客户驱动器映射服务。
- The specified terminal connection driver was not found in the system path. 在系统路径上找不到指定的终端连接。
- This is the maximum voltage that can be applied safely to an output terminal, with respect to the ground of the device. 这是能安全地作用于输出端的、相对于器件地的最大电压。
- And illustrate system input and output terminal assignment, system software design. 并给出了系统输入、输出端子分配、系统软件设计。
- JEDEC ? The voltage level at an output terminal with input conditions applied that, according to the product specification, will establish a low level at the output. 根据产品技术规范,随加到输入端的情况,一个输出端的电平,它将(在输出端)建立一个低电平。
- For the first time, this model is equipped with a DSP and optical output terminal as well as a sound quality adjustment function on the LCD panel. 第一次整合了DSP和光纤输出终端;并且还配备了一个能够显示频响的LCD;并且可以进行频响调节.
- The Client Drive Mapping Service Has Connected on Terminal Connection. 客户驱动器映射服务已连接在终端连接上。
- The requested operation cannot be completed because the Terminal Connection is currently busy processing a connect operation. 请求的操作不能被完成,因为终端连接当前正在忙于执行一个连接操作。
- The current into the output terminal with input conditions applied that, according to the product specification, establishes a high level at the output. 按加到输入端信号的情况,电流流进一个输出端,并按照产品的技术规范,在输出端建立一个高电平。
- The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output. 按加到输入端信号的情况,电流流进一个输出端,并按照产品的技术规范,在输出端建立一个低电平。
- It is only necessary to use the Unix command that sets up a remote terminal connection (Telnet),followed by the address of the distant machine. 只需使用Unix命令Telnet来建立远程终端连接,命令后跟上远端计算机的地址即可。
- The voltage level at an output terminal with input conditions applied that, according to the product specification, will establish a high level at the output. 根据产品技术规范,随加到输入端的情况在输出端的电平,将在输出端建立一个高电平。