您要查找的是不是：
- ATF34143 and MGF0919A are used to realize power amplifying, the output power is about 27.5dBm, P1dB is about 32dBm. 功率放大部分采用ATF-34143和MGF0919A做双级A类放大器设计，输出功率27.;5dBm，P1dB约32dBm；
- Purpose: Power amplifier applications, vertical output applications. 用途:用于功率放大和帧频输出。
- output power amplifier 输出功率放大器
- Design of Multistage Power Amplifier in Ku Band. Ku波段多级功率放大器的研制。
- The output power can never equal the input power, for there are always losses. 输出功率绝不能等于输入功率，因为总存在着损耗。
- Purpose: Medium power amplifier applications. 用途:用于中功率放大。
- Output power is stable, it can work in all weather. 输出功率稳定,可全天候工作;
- Adaptive output power minimizes interference. 可变的电源输出使干扰减小到最
- This terminal is to output signals to external constant-voltage power amplifier. 输出到外部定压功放,用于大厅、走廊、室外等扩声范围较大的区域。
- The ratio of output power from an amplifier system, to the input power. Gain is normally measured in decibels. 放大系统的输出功率与输入功率之比,增益通常用分贝表示。
- Loikkanen M, Kostamovaara J.Low voltage CMOS power amplifier with rail-to-rail input and output [J]. 王为之，靳东明.;一种采用共栅频率补偿的轨到轨输入/输出放大器[J]
- Purpose: High voltage switching, AF power amplifier, 100W output predriver applications. 用途:用于高压开关，音频功率放大，100W输出前置放大。
- The replacement of BTL power amplifier with VCCS is adopted,to make the output impedance much higher and to overcome the anti-turning moment. 为此提出采用VCCS代替BTL功放来提高输出阻抗,克服恢复力矩。
- Purpose: Audio frequency power amplifier applications. 用途:用于音频功率放大。
- Connect the Power Amplifier to Analog Channel B of the interface. 将功率放大器连接到接口上的模拟通道B。
- High output power, steady energy, adjustable, deep marking . 激光输出功率高，能量稳定，连接可调，深度雕刻。
- Purpose: Strobo flash, medium power amplifier applications. 用途:用于闪光驱动,中功率放大电路。
- The span of wavelength is 0.6 nm,and output power is 8 dBm. 室温下;相关实验获得激光双波长间隔0.;6 nm;输出功率8 dBm。
- In the end, it introduced a new type class-d power amplifier DPPC. 本论文所完成的开关功放已完成样机试验。
- Power gain (18) The ration of output power to input power. 功率增益(18)輸出功率對輸入功率之比值。
