您要查找的是不是:
- Parting line at the acceptable surface. 合模分布在合理可接受的表面。
- Parting line cleared and released properly? 分模线是否正确?
- Parting line locks are required on all molds. 琐模块所有的模具都需要。
- The parting line tolerance for gib installation is +.000/-.002. 安装导板的分模线公差为+.;000/-
- Technologies available include Microtext Print, Fine Line Print, UV and Colour Shift Inks plus a holographic range. 现有技术包括微型打印,细线条打印, UV和彩色油墨的转移,另加全息范围。
- Command line prints a trace of the class loading process. 会打印类装入过程的跟踪记录。
- There's an undercut at this position and it needs a slider. It will also have a parting line on this side, is that OK? 产品的这个位置不能出模,我们打算做行位,在此面上会有分模线,你接受吗?
- Becasue of hand deflashing, please mark the parting line into the drawing, and please let me know then the flash size. 因为手遮光,请将分界线在图中标出来,并告诉确切尺寸。
- Mould halves requiring accurate alignment of core and cavity, and shut off should have appropriate part line locks. 上、下模需要精确配合或有擦位的地方,模具一定要有直身锁。
- The parting line at ends of block should be designed such that any offset is in 1"increments for maintenance purposes on core. 考虑到动模维护需要,封胶面应有1”左右的偏移增量。
- The optimization parting direction was determined after all undercut features were distinguished, and the parting line and parting surface were confirmed accordingly. 通过侧凹特征的判别确定模具的优化脱模方向,并确定模具的分型线和分型面。
- The selection of parting line,the determination of round sprue runner diameter,the design of round sprue runner shape and pouring gate form were presented. 介绍了模具分型面的位置选择、圆形流道直径的确定、圆形流道形状的设计、浇口形式等。
- Elegant bombazine cloth gives a room infuse warm and downy sunshine. Upper part line with novel and chic blue, green, purple " leaf " , bright beauty. 精美的棉纱织品给房间注入了暖和柔和的阳光。上方衬以新奇别致的蓝色、绿色、紫色“叶子”,明亮漂亮。
- Over score A line printed over character or words.Also called Strike-through, Strike-out See Underscore. 加在字或字句上的横线。参阅底线。
- I can probably give them more draft but I still want the round inside the cutouts which means I still want the parting line to be on the inside surface of the part in those areas. 我能给予他们更多的牵伸率;但我仍希望裁断块的内侧圆些;我仍希望分开线在要在那些区域的内侧平面上.
- Undercuts and similar parting line issues are made highly visible two dimensionally on our computer monitors-allowing us to avoid costly and time-consuming errors. 削弱和类似临别线的问题是非常明显的两个三维电脑显示器我们,使我们能够避免昂贵和费时的错误。
- We recommend that, for not more than 150 line prints the 6 + 1 flexo printing machine should be the root apolegamy 9 roller. 我们倡导,差于不不及150线的印品,这栽6+1柔印机答选配9不梢网纹辊。
- It's sad that we have to part company with them. 很遗憾我们要与他们分别了。
- A diagonal mark(/) used especially to separate alternatives, as in and/or, to represent the word per, as in miles/hour, and to indicate the ends of verse lines printed continuously, as in Old King Cole/Was a merry old soul. 斜线号一种斜线符号,尤用于对选择加以区分,如和/或者,表示每 ... 这一词,如英里/小时,和在诗尾表示连续打印行,如老国王考勒/是一个快乐的老人
- An improvement plan on the demolding of plastic parts from injection moulds with flat gate and single parting line was proposed. 介绍了平浇口单分型面注射模塑件脱模的改进方案,分析了该注射模缓拉料机构的工作原理和模具工作过程,阐述了该模具结构设计的优点。