您要查找的是不是：
- pearlite critical cooling rate 珠光体临界冷却速度
- The results show that,as TiO_2 content increases and B_2O_3content decreases in the glasses,the critical cooling rate of the glasses increases,and the glass formation becomes more difficult. 结果表明,随玻璃组份中 TiO_2含量的增加、B_2O_3量的减少,玻璃的临界冷却速率值增大,玻璃形成趋于困难。
- Keywords rail steel;CCT curve;critical cooling rate; 重轨钢;CCT曲线;临界冷却速度;
- Keywords bulk metallic glasses （BMGs）;critical cooling rate;coercivity; 大块非晶合金;临界冷却速率;矫顽力;
- A new model for calculating the critical cooling rate of bulk metallic glass under non-isothermal condition 大块非晶临界冷却速率的非等温转变计算模型
- Predicting the Critical Cooling Rate of Bainite Start Point Using Artificial Neural Networks 用人工神经网络预测钢的贝氏体开始转变临界冷却速度
- Keywords vitrifying;critical cooling rate;semi-empirical crystallization model;DSC; 玻璃化转变;临界降温速率;半经验结晶模型;DSC;
- Keywords differential dilatometer;T91 ferritic heat-resistant steel;undercooled austenite;critical cooling rate; 差分膨胀仪;T91铁素体耐热钢;过冷奥氏体;临界冷却速度;
- Keywords bulk amorphous alloys;glass forming ability;critical cooling rate;temperature interval of supercooled liquid region;viscosity; 大块非晶合金;玻璃形成能力;过冷液相区温度范围;临界冷却速率;粘度;
- critical cooling rate 临界冷却速率,临界冷却速度
- upper critical cooling rate 上部临界冷却速率,上部临界冷却速度
- lower critical cooling rate 下临界冷却速度
- The retrogradation was increased by a slower cooling rate. 慢速降温冷却也有利于增大回生程度。
- At a slow cooling rate, the size of spherulite becomes larger and more regular. 并且在慢速冷却条件下，球粒尺寸明显增大，球体更加规则。
- The formability would be influenced with the reduction of the cooling rate. 但随着冷却速度下降，易产生流淌，影响成形性。
- However,at the relatively faster cooling rate,when the tempering tempe... 快速冷却条件下,回火温度升高,强韧性下降。
- Effects of cooling rate on eutectic microstructure of Zn-(0.24Ni) alloy for hot dip galvanization were investigated. 研究了冷却速度对用于热浸镀Zn的Zn0.;24Ni合金共晶组织的影响。
- It is found that the cooling rate has great effect on oxide precipitation and growth. 计算结果表明，冷却速率对凝固过程中氧化钛的析出和长大有重要影响：冷却速率越小，氧化钛长得越大。
- The more the increasing of cooling rate or pre-deformation, the more the secondary dendrite arms are easy to coarsen. 冷却速率越大或预变形处理以后的试样在熔化过程中更容易发生二次枝晶臂之间的合并。
- The higher the cooling rate, the lager the corresponding thermal expansion changes. 降温速率越大,其相应的热膨胀系数也越大;
