您要查找的是不是：
- perchlorvinyl resin coating [化] 过氯乙烯树脂涂料
- Polyester film,inductive, epoxy resin coating. 聚乙酯膜，有感结构，环氧树脂包封。
- The interior of the storage tank shall be lined with a special resin coating. 热水炉容器内胆应该内衬特殊的树脂涂层。
- Epoxy resin coating creates excellent performance in humidity resistance, mechanical strength and heat resistance. 环氧树脂封装,从而具有优良的防潮性能、机械强度及耐热性。
- CL21 are non-inductively wound with metallized polyester film as the dielectric/electrode with copper-clad steel leads and epoxy resin coating. CL21为无感结构，用金属化聚酯膜为电介质／电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- The organosilicon acrylic resin coating is an exterior wall coating with excellent weatherability and contamination resistancs. 硅丙树脂涂料是一种具有优异耐候性及耐沾污性的外墙涂料。
- CL21X are non-inductively wound with metallized polyester film as the dielectric/electrode with copper-clad steel leads and epoxy resin coating. CL21X为无感结构，用金属化聚酯膜作为电介质／电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- The existing main products have Kemao licensing KA, KF and KS series tackifier resin, KZ series resin coating and ink resin KX series. 现有主要产品有科茂牌KA、KF和KS系列增粘树脂、KZ系列涂料树脂以及KX系列油墨树脂。
- MPC are non-inductively wound with metallized Polyester dielectric/electrode and copper-clad steel leads with epoxy resin coating. MPC无电感性，用聚丙烯膜介质和铝箔绕制，用铜覆盖钢引线作电极，用环氧树脂作外被层，适合于长期稳定的高频电路。
- Are non-inductively wound with metallized polyester film as dielectric/electrode with copper-clad steel leads and epoxy resin coating. 为无感结构，用金属化聚酯膜作为电介质/电极绕制而成，导线采用镀锡铜包铜线，使用环氧树脂包封。
- CBB21 are non-inductively wound with metallized polypropylene film as the dielectric/electrode with copper-clad steel leads and epoxy resin coating. CBB21为无感结构，用金属化聚丙烯膜作为电介质／电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂包封。
- Structure: Adopting two film with positive &no getive temperature coefficient of inter-compensation as dielectric, AL foil as electrode, unidirectional lead, epoxy resin coating. 结构：采用正、负温度系数互相补尝的两种薄膜作介质，铝箔作电极卷绕而成，单向引出，环氧树脂包封。
- Curing process is an essential step in the preparation of silicone resin coating,in which polycondensation of multi-silanol mainly occurred in a non-solvent system. 固化是有机硅树脂涂层制备过程的一个重要步骤,其本质是多元硅醇在非溶液体系中的交联缩聚反应。
- SH-HONEST POSSESSES A SET OF ADVANCED MANUFACTURE EQUIPMENT AND TOP-RANKING EXPERTS WHO SPECIALIZE IN THE FLUOROCARBON RESIN COATING MATERIAL RESEARCH AND DEVELOPMENT. 公司具有现代化的生产设备和一流的高级技术专家，专业化从事氟碳涂料的研究、开发、生产、应用及销售。
- Glass flakes increase the hardness of epoxy and polyester resin coatings, giving higher resistance to surface wear. 玻璃鳞片提高环氧树脂和聚脂树脂涂层的硬度,给外表涂层提供更高的抵抗力。
- Linerless lamination cost low, is by far the most widely used a resin coated material. 无底纸膜覆膜成本低，是目前使用最广泛的一种覆膜材料。
- Its own dry slowly, and also fibrious ink drying characteristics, it is also difficult to adapt to the resin coated. 其本身干燥慢，还具有抑制油墨干燥的特性，这一点也难以适应覆膜。
- Reaction with GMA and photoinitiator, UV-Curable waterborne epoxy resin coatings have been prepared. 在制备光固化水性环氧涂料的过程中，讨论了环氧开环和引入GMA的意义。
- The correct process concentrate and gilding, select resin coated and OPP anodized matches. 正确的工艺是应先覆膜再烫金，选择与OPP相匹配的电化铝。
- PPS are non-indectively woud with Polypropylene dielectric and metallized Polypropylene film in series with aluminum foil for electrodes using copper-clad steel leads and epoxy resin coating. PPS无电感性，用聚丙烯和金属聚丙烯膜与铝箔串联绕制，用铜镀层钢引线作电极，用环氧树脂作外包装，宜于高频和高脉动增长时间电路。
