您要查找的是不是：
- Analytic Solution to Piezoelectric Cantilever Beam with Concentrated Force at Free End 悬臂压电梁自由端受集中力的解析解
- piezoelectric cantilever beam 压电悬臂梁
- Piezoelectric elements were pasted on/under the cantilever beam where stress was the maximum or sub-maximum as actuators to control the vibration of the cantilever beam. 在悬臂梁振动时应力最大或次最大处的上、下表面同位元配置压电片，作为抑制悬臂梁振动的致动器。
- ANALYTICAL SOLUTION OF THE BENDING PROBLEM OF PIEZOELECTRICITY CANTILEVER BEAM UNDER UNIFORMLY DISTRIBUTED LOADING 均匀分布荷载作用下压电悬臂梁弯曲问题解析解
- Based on the model, the piezoelectric cantilever microactuators using PZT film on silicon are simulated and analyzed. 采用此模型，对硅基PZT压电悬臂梁型微执行器进行了模拟和分析。
- Furthermore, in terms of the analytical results, the piezoelectric cantilever microactuators are designed and optimized, and the optimal methods are put forward. 根据此分析结果，进一步优化了压电悬臂梁型微执行器的设计，并给出了优化的方法。
- The piezoelectric bimorphs of cantilever beams are used to fabricate a microgripper which is used in micromanipulation system. 摘要采用双晶片型压电悬臂梁制作一种双悬臂梁结构的微夹钳，可用于微操作系统中的微夹持器。
- Paper 8 - DeVoe, Don L., and Albert P. Pisano. "Modeling and Optimal Design of Piezoelectric Cantilever Microactuators." Journal of Microelectromechanical Systems 6, no. 3 (September 1997): 266-270. 论文9－〈纯纳米管纤维的赖斯提纯制备〉，与凯夫拉尔纤维、采龙纤维相似的先进纤维制备方法.
- Force-measuring elements employ either a cantilever beam or a column arrangement. 测力元件采用悬臂梁或柱的形式。
- Finite element design, cantilever beam withstanding load distortion situation, some graphical displays. 详细说明:有限元设计,悬臂梁承受荷载的变形情况,有图形显示。
- The dynamics of a cantilever beam attached to a rotating rigid body is reported in this paper. 摘要本文对固结在转动刚体上柔性梁的动力学问题进行了研究。
- By reviewing relevant literatures, it is known that the design model is similar to the cantilever beam structure. 中文摘要植牙术后的骨整合程度，关系到手术是否成功。
- A concise deflection model for piezoelectric cantilever microactuators is derived using the radius of curvature of piezoelectric multilayer cantilevers. 摘要利用压电多层膜悬臂梁的形变曲率半径，导出了简洁的压电悬臂梁型微执行器的偏转模型。
- Dynamical characteristics of the cantilever beam were analyzed and its dynamical equation was developed by using PEA. 采用有限元分析方法研究悬臂梁的动态特性，建立其动力方程。
- piezoelectric cantilever bimorph 压电双晶片
- piezoelectric cantilever dibrator 单晶压电振子
- piezoelectric cantilever modeling 压电悬臂梁建模
- A cantilever beam was experimentally studied with this method and the result is consistent with theoretical result. 以悬臂梁为例进行实验研究，实验结果与理论计算结果吻合较好。
- The structure consists basically of two cantilever beams. 这种结构基本上由两根悬臂梁组成。
- With hoisting method by double cantilever beam,the hoisting of large steel trusses was get success. 双悬臂梁吊装法解决了大型钢桁架高空吊装问题,且省工、省料,实践证明,该法安全、可靠,较为实
