您要查找的是不是:
- piezoelectric hysteresis 压电滞后
- As a rule these materials do not show hysteresis. 一般说来,这些材料不显示磁滞现象。
- The substance is then said to exhibit hysteresis. 因此人们说这类物质出现滞后现象。
- The linear PID controller may not perform well in the case where nonlinear hysteresis is found in the piezoelectric actuator. 对于具有非线性滞环特性的压电驱动器,采用线性PID控制器难以达到理想的控制效果;
- Low, T. S., and Guo, W., 1995, "Modeling of three-layer piezoelectric bimorph beam with hysteresis", IEEE Journal of Microelectromechanical Systems, 4, (4), pp. 230-237. 冯荣丰、杨竣翔、韩长富,2003,”磁滞与摩擦力考虑的奈米定位”,物理双月刊二十五券三期。
- And the hysteresis of flow transforms was verified. 并且验证了流型转变的滞后特性。
- Low, T. S., and Guo, W., 1995, “Modeling of three-layer piezoelectric bimorph beam with hysteresis”, IEEE Journal of Microelectromechanical Systems, 4, (4), pp. 230-237. 冯荣丰、杨竣翔、韩长富,2003,”磁滞与摩擦力考虑的奈米定位”,物理双月刊二十五券三期。
- T.S.Low, and W.Guo, “Modeling of a Three-Layer Piezoelectric Bimorph Beam with Hysteresis,” Journal of Microelectromechanical Systems, vol. 4, no. 4, pp.230-237, Dec. 1995. 林得耀;以压电致动器迟滞模型为基础之控制补偿;硕士论文;国立彰化师范大学机电工程学系;2003年.
- Design of broadband piezoelectric ceramic receiver. 宽带化压电陶瓷受话器的设计。
- There is hysteresis between the sorption and desorption curves. 吸湿与脱湿曲线间有一定的滞后现象。
- The scalar in hysteresis loop measurement for soft magnetic ring. 软磁环磁滞回线测量中的定标。
- The squareness of the hysteresis loop is also improved greatly. 磁体磁滞回线的方形度也得到了很大的改善。
- Failure mechanics of piezoelectric materials and structures II. 压电材料及其结构的断裂力学2。
- Piezoelectric materials have many superiority on precision actuate. 通过比较和分析,压电材料在实现精密驱动上具有相当大的优势。 二.
- A piezoelectric element is appressed with the impacting object. 一个压电元素是紧贴与冲击的对象。
- The possibility of piezoelectric SSA is investigated. 重点分析了压电材料作自感知执行器的物理基础。
- Novel sophisticate stepping 2-DOF piezoelectric actuator[J]. 引用该论文 刘国嵩;杨志刚;曾平;程光明.
- The formula also fits the data of magnetic hysteresis loop very well. 该解析表达式对磁滞回线的模拟效果也非常令人满意。
- Hysteresis phenomenon is very common in many ferroelectric materials. 研究磁电滞回线在交变外场下的动力学性质的课题称为回线动力学。
- Switching points and hysteresis are changeable via two buttons on the display. 开关点和滞后可以通过显示屏上的两个按钮来改变。