您要查找的是不是:
- pile backing plate 桩垫板
- Why the new rotary backing plate? 为什么说它是新的旋转底盘?
- Rough surface in front and back plate. 前面与后面支承板表面粗糙。
- Damaged back plate across the width. 后固定盖板在宽度方向上破损。
- Wider back plate to cylinder settings. 后罩板到锡林的隔距宽。
- Variation in setting between back plate and cylinder. 后固定盖板和锡林隔距差异大。
- Back in March, when commodity prices were at a low, Rob Pemberton, of financial advisers HFM Columbus in Tunbridge Wells, told investors to pile back in. 但不可否认这是个具有风险的策略。
- We piled back into the van and drove back the half hour to the DMV. 于是我们又坐进汽车,驱车半小时来到车管所。
- All wire burned sections are to be mounted in hardened tool steel with hardened backing plate. 所有的线割入子必须安装在热处理的模板上并有热处理后的支撑板。
- What this means is the auger, (the threaded part to which the backing plate attaches), is driven directly off the electric motor. 它是一个螺丝钻(背面有图案装饰的)可直接切断电源。
- The new "Easy Buff" Rotary Backing Plate is technology borrowed from our OEM Polishing System used at the car factories. 新的旋转底盘是借助于OEM抛光系统在汽车制造厂使用的技术。
- I have a huge pile of letters to deal with. 我有一大堆信件要处理。
- The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface. 底板用配套焊条焊接,使复层侧的焊缝与背衬板表面齐平。
- As an alternative to a hard backing plate, this cushioned backing plate distributes pressure for smoother buffing and minimizing swirls. 作为可更换的硬底盘,这款缓和底盘冲击的底盘可以在进行平滑抛光和减到最小程度螺旋纹时减少压力。
- The gauze disc (6) serves to hold the coiled wick tightly against the fuel charge, while the back plate (10) protects the washer. 纱网盘(6)用于保持导火索盘紧靠燃料块,后盘(10)用于保护垫圈。
- Hardened backing plates are required under all pads that bottom out. 最底下的那块垫板后应该加一块热处理背板。
- We mainly produce supermarket rack, warehouse storage rack, back plate& back mesh big rack, disk rack, bookstack, multifunctional shel fect. 本公司专业生产超市货架、储货架、板背网式大货架、碟架、架、功能置物架等系列产品。
- Your letter got buried under a pile of papers. 你的信压在一堆文件下面了。
- Moreover,comparing to traditional mechanical analysis,this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity. 以注塑模垫板的设计为例详细阐述,并与传统力学分析对比,为注塑模具的型腔设计提供了一种新方法。
- I bet they are making a pile out of the deal. 我肯定他们这笔生意一定赚大钱。