您要查找的是不是：
- Machining Tolerance of Piston Pin End Surface by Analysis and Calculation Method 分析计算法确定活塞销加工余量
- piston pin end 活塞销止动螺钉
- piston pin end cap 活塞销盖
- Remove 2 clips securing piston pin. 拆下固定活塞销的两个夹。
- A piston pin fits into a round hole in the piston. 活塞销装在活塞的环形的孔里。
- The piston end of the rod is attached to the piston by the piston pin, or wrist pin. 连杆的活塞端用活塞销或销轴安装在活塞上。
- The connecting rod is attached to the piston by the piston pin. 连杆与活塞的连接是采用活塞销。
- The piston pin joins the piston to the connecting rod. 活塞销把活塞和连杆连接起来。
- Stand behind the mast at one meter away,sight the pin end. 站在旗杆后至少1米处，瞄向下风旗杆。
- The thick part of the piston that holds the piston pin is the pin boss. 用来支撑活塞销的活塞厚的部分称为活塞销凸台。
- Wrist pin end carried on double row long cylindrical roller bearing. 连杆小端装有双列长圆柱滚子轴承。
- The factory is Tappet car engine and hydraulic piston pin the specialized production enterprises. 本厂是汽车发动机液压挺杆和活塞销的专业化生产企业。
- Guide pin ends must have.250"clearance when die is fully closed. 当模具闭合时导柱末端到模座上表面必须有.;250”的间隙。
- Automobile engine factory hydraulic tappet and the piston pin of the specialized production enterprise. 本厂是汽车发动机液压挺杆和活塞销的专业化生产企业。
- The bimetal bushing for spring bush , piston pin , rocker arm , connecting rod , cam shaft , balance shaft and other applications of bimetal bushings . 双金属轴承应用于:弹簧销;活塞销;摇臂;连杆;凸轮轴;平衡轴等部件.
- So the bending stiffness of duckbilled connector should be simulated accurately, otherwise, it will produce large error in dealing with pin end or rigid end of chords. 铰连或刚接处理方法均会带来很大误差。
- Using the method introduced in this paper, one can theoretically ascertain the motion pattern of the piston pin and compute out the heat output along the rubbed surfaces. 应用本文的方法可以从理论上探明活塞销的运动规律,并计算出各摩擦区的发热量。
- The traditional parameters of a piston pin surface include the arithmetical mean deviation of the profile ( R a ) and the mean spacing of the profile irregularities ( S m ) etc. 用表面轮廓仪测量磨削加工的活塞销轴,得到各试件粗糙轮廓算术平均偏差、轮廓微观不平度平均间距数值。
- In this paper, precision machined piston pin surfaces were measured and the values of R a and S m were known.The fractal dimensions of the profiles were c... 采用功率谱密度法计算各轮廓的分形维数,应用模糊数学理论,求出分形维数与高度及间距参数的模糊逻辑关系。
