您要查找的是不是：
- Piston Ring Groove Depth – #1&2 活塞环凹槽深度– %231&2
- Sideway Fine Feed System for Finishing Piston Ring Groove 精切活塞环槽侧向微进给系统设计
- Argon Arc Strengthen Process of the Aluminum-Alloy Piston Ring Groove 铝合金活塞环槽的氩弧强化工艺
- By the test results and some relevent theories, the wear mechanism of the cutting tool and the extrusion mechanism beteen the cutting tool and the cutted surface of workpiece in cutting alpax piston ring grooves have been researched. 根据试验结果及有关理论，对切削环槽过程中副后刀面与已加工表面之间的熨压机理、刀具磨损机理进行了较为深入的研究、探讨。
- Discussion of Machining Trapeziform Piston Ring Groove of Abrasion Resistant Cast Iron for Piston 活塞耐磨铸铁梯形环槽机加工探讨
- Study on the extrusion process between the cutting tool and the cut surface of workpiece in cutting aluminum alloy piston ring groove 精切铝活塞环槽过程中刀具对环槽两侧面的熨压研究
- piston ring groove 涨圈槽,活塞环槽
- piston ring groove cleaner 活塞槽清洗器
- ANQING TP GOETZE PISTON RING CO., LTD. 安庆帝伯格茨活塞环有限公司。
- JiangSu Yizheng Wellong Piston Ring Co., Ltd. 江苏仪征威龙活塞环有限公司。
- Nanjing Feiyan Piston Ring Co., Ltd. 南京飞燕活塞环股份有限公司。
- Kaifeng Dongri Piston Ring Manufacture Co., Ltd. 开封市东日活塞环制造有限公司。
- Piston rings require an oil film between ring and liner and between ring and piston groove to seal against these high pressures and to prevent blowby. 为了密封，在活塞环与连杆之间、活塞环与或活塞槽之间需要一层油膜以承受住这些高压、阻止漏气。
- These bands are called piston rings. 这些圈叫做活塞环。
- The molded PTFE ring is bonded into a seat ring groove in the face for maximum service life. 这种模铸聚四氟乙烯环粘合在阀座表面的阀座环槽内，最大限度延长使用寿命。
- The frictional power consumption in piston ring group were analyzed. 分析了活塞环组的摩擦损失,研究了活塞环的结构变化。
- Cleaning of Wearable Ring Groove Instert of Piston 活塞耐磨圈的清洗
- Stonehenge Stonehenge arranged by the ring and ring groove, boulder from about 250 km away from the western part of Wales Pilisili Hill. 巨石阵由环状排列的巨石和环状沟组成，巨石产自约250公里以外的威尔士西部的皮利斯里山。”
- piston ring grooves 活塞环槽
- The use of a snap ring inserted in the snap ring groove in the outer ring provides a particularly economic and axially space-saving arrangement (fig 4). 采用插入外圈卡环槽内的卡环可以组成特别经济、节省轴向空间的配置(图4)。
