您要查找的是不是:
- Strength criterion of concrete under plane stress state 平面应力状态下混凝土的强度准则
- Complex Number Analysis Method for Plane Stress State and Plane Strain State 平面应力状态平面应变状态的复数分析方法
- A simple and convenient method about measurement of principal stresses in plane stress state 一种测量平面主应力的简便方法
- Under these conditions the state of stress is predominantly plane stress. 在这些条件下,应力状态是平面应力占优势。
- plane stress state 平面应力状态
- Define the plane stress D matrix. 定义平面应力D矩阵。
- b)Triaxial material tests have been made on epoxy cast thin-walled cylinderical samples when they are in plane stress state where there are six principal stress ratios (1=0, 1=0.5, 1:0.96, 1: -1, 1: 0.38, 1:-0.155) . 对环氧树脂浇注体薄壁园管试件;在平面应力状态下的六种主应力比(1:0;1:O.;5;1:0
- A body is said to be in a state of plane stress or alternatively in a two-dimensional or biaxial state of stress. 据称该物体处于平面应力状态或二维应力状态或双轴应力状态。
- The plane stress field is obtained by complex stress func... 平面应力场借助保角映射的方法通过复变应力函数得到。
- To analyse stress state of mandible pulled by masticatory muscles. 目的:应用有限元方法分析咀嚼肌牵动的下颌骨应力状态。
- We now illustrate the entire procedure in solving a plane stress problem. 我们现在来举例说明解一个平面压力题的全部过程。
- The two cases of plane stress and plane strain will be discussed separately. 平面应力和平面应变这两种情况将分开讨论。
- Stress ellipsoid is often used to describe the variation scope of stress state. 全应力的变化范围常用应力椭球方程和应力椭球面来描述。
- All these stress states pertain to the same load. 所有这些应力状态都适合同样一个载荷。
- Study on simplified identification method to determine relationship between principal stresses and principal planes in plane stress state 主应力与主方向角对应关系的简捷判别方法
- We may use the plane stress analysis for determining deflections in the midplane of the beam. 我们可以用平面压力的分析方法来确立梁中间面的挠度。
- There are two plane problems in the theory of elasticity, the problems of plane strain and of plane stress. 弹性理论中有两类平面问题,即平面应变和平面应力问题。
- The performance of GCL will be influenced by stress state and hydrated condition. 应力状态等外界条件的变化使得GCL中膨润土孔隙比有较大的变化范围,对水和污染物在GCL中的运移也有较大的影响。
- We defined the conditions of the plane stress distribution of thin plates subjected to in-plane forces. 我们定义了承受平面力的薄板平面应力分布条件。
- Predict the stress state coefficient by neural network model, it can improve the precision of rolling force. 采用神经网络模型对应力状态系数进行预报,可提高轧制力的预报精度。