该词条未找到_海词词典

您要查找的是不是：

Performance Characteristics of Non-Transfer Arc Plasma Spray Torch 直流非转移弧等离子喷枪中电弧的工作特性研究
Design of a Plasma Spray Torch of Elongating Arc and the Arc Voltage Tests on It 拉长电弧的等离子喷枪设计与弧压测试
Keywords plasma spray torch;elongating arc;arc voltage fluctuation;arc voltage;test; 等离子喷枪;拉长电弧;电弧电压波动;弧电压;测试;
plasma spray torch 等离子喷枪
The calefaction and acceleration process of ceramic powders in plasma spray were studied by numerical simulation. 通过数值模拟研究了等离子喷涂陶瓷粒子的加热加速行为。
PS304 is a composite plasma spray solid lubricant coating used in high speed,high temperature Oil-Free Turbomachinery. PS304是应用于高速、高温无油透平机械的一种复合等离子喷涂固体润滑镀层。
Titanium coatings have been deposited onto 317L stainless steel plate by low pressure plasma spray(LPPS)process. 采用低压等离子喷涂工艺，在317L不锈钢质接骨板上喷涂了钛涂层，制备出钛涂层的接骨板。
The special processes include vacuum brazing, vacuum furnaces, plasma spray, rubber application, NDT, MPI, FPI, EDM etc. 普惠公司是世界三大发动机生产公司之一占有世界民用发动机将近一半的市场份额。
Experimental results provide the process monitoring of coating temperature the prewarning of coating damage and the focusing scope in plasma spray. 实验结果为等离子熔射过程中皮膜温度监控确定了皮膜破坏预警信息和核心目标监控区域。
The method of plasma spray coating was used to prepare the FeS coatings on 1045 steel substrate with three thicknesses respectively. 利用等离子喷涂在45钢表面制备了三种厚度不同的硫化亚铁固体润滑层。
Effect of Mn and Ti precipitates on the hot ductility of low carbon and ultra low carbon steels High Hardness Alumina Coating Prepared by Low Power Plasma Spray. 超低碳钢的高温强度节能、高效率等离子喷涂设备的开发。
The results of the wear, abrasion and corrosion tests show that the abrasion and corrosion resistance of the laser cladding is better than that of the plasma spray coating. 耐磨性、抗擦伤性和耐腐蚀性等性能实验表明 ,与等离子喷涂层相比 ,激光熔覆层具有较好的抗擦伤性能和耐腐蚀性能
A direct current plasma spray gun was designed in which separation sections were set between anode and cathode to restrict the large-scale diffluence of arc. 在此基础上,设计了一种直流等离子体喷枪,采用在阳极和阴极中间设置隔离段的方法来限制电弧的大尺度分流。
Basic mechanisms of plasma spray forming (PSF) and plasma arc cutting (PAC) ceramic with additional anode have been introduced according to generating characteristic of plasma. 通过快速制造零件和模具的实验,分析了等离子熔射成形件质量的主要影响因素;
Electron beam physical vapor deposition (EB-PVD) and air plasma spray (APS) deposition are now the two most important methods prepared for high temperature coatings. 电子束物理气相沉积和等离子喷涂是目前制备高温涂层的两种最重要方法。
Air plasma spray technique was used to gain a thin and porous anode layer of intermediate temperature solid oxide fuel cell SOFC by taking charcoal active powder as pore-forming agent in this paper. 摘要采用大气等离子喷涂技术，以活性炭粉作为成孔材料，获得了薄且多孔的中温固体氧化物燃料电池SOFC阳极层。
In this paper, prevailing TBC deposition technologies, including plasma spray, electron beam-physical vapor deposition, ion beam assisted film deposition and chemical vapor deposition, are reviewed. 综述了热障涂层研究及应用中的几种主要制备技术，包括等离子喷涂、电子束物理气相沉积、离子束辅助沉积、化学气相沉积等。
In this paper,prevailing TBC deposition technologies,including plasma spray,electron beam-physical vapor deposition,ion beam assisted film deposition and chemical vapor deposition,are reviewed. 综述了热障涂层研究及应用中的几种主要制备技术,包括等离子喷涂、电子束物理气相沉积、离子束辅助沉积、化学气相沉积等。
Principle and characteristic of the plasma spraying were introduced. 介绍了等离子喷涂的原理及特点;
Shine your torch into the drawer. 你用手电筒照一下这抽屉里面。