您要查找的是不是：
- A high water absorption polyacrylic acid resin was obtained using inverse suspension polymerization. 采用反相悬浮聚合法合成了聚丙烯酸高吸水性树脂。
- Used in plastic material of ABS resin,HIPS resin,bard PVC resin,polyacrylic acid resin or epoxy resin,wood products and metal materil with primer coat. ABS树脂、HIPS树脂、硬度PVC树脂，聚丙烯酸树脂及环氧树脂等塑料底材，木材制品及涂有底漆的金属材料。
- Synthesis of Polyacrylic Acid Resin and Its Application in Jinggangmeisu Extraction 新型聚丙烯酸树脂的合成及其在井冈霉素纯化中的应用
- Hydrolysis properties of the cupric-ion crosslinking polyacrylic acid resin particles 聚丙烯酸铜树脂颗粒水解性能的研究
- polyacrylic acid resin 聚丙烯酸树脂
- Fe-ion crosslinking PAA (polyacrylic acid) resin particles have been synthesized and analyzed. 合成并分析鉴定了铁离子交联的聚丙烯酸树脂颗粒。
- A high oil-absorption resin of polyacrylic acid system with moderate crosslinking was synthesized by suspension polymerization. 采用悬浮聚合的方法合成一种交联适中的聚丙烯酸系高吸油性树脂。
- Synthesis and properties of solid polyacrylic acid size NS by instant. 数字化期刊。固体聚丙烯酸浆料NS的瞬时聚合法合成与性能研究。
- Then D-Phe is separated by strong acidic resin. 选用强酸性阳离子树脂对产物D-苯丙氨酸进行分离纯化，优化了分离条件；
- Polyacrylic acid size is one of main sizes.Its importance for environmental protection has been more concerned. 随着人们环保意识的加强,作为纺织3大类浆料之一的聚丙烯酸类浆料,越来越受到人们的关注。
- XPS results showed that the mole ratios of polyacrylic acid (PAA) to PE were dependent on the grafting degrees. XPS研究表明,表面聚丙烯酸(PAA)与PE的摩尔比与接枝率有一定的关系,从而成为其XPS表征的基础。
- Under ultrasonic polyacrylic acid was synthesized with ammonium persulfate as initiator. 以过硫酸铵为引发剂,在超声波辅助下引发丙烯酸单体聚合。
- The adsorption behavior of amino methylene phosphonic acid resin (APAR) for mercury (II) was studied. 研究了Hg2+在氨基膦酸树脂上的吸附行为。
- Objective To synthesize copolymers composed of polyacrylic acid and poloxamer 407,and investigate its thermo-sensitive gelling properties in situ. 目的制备丙烯酸和泊洛沙姆407构成的共聚物,研究其温度敏感的原位胶凝性质。
- PU paint firming agent, PU Jiaozhanji : floating toluene two different cyanic acid resin (TDI). 聚氨酯漆固化剂、聚氨酯胶粘剂：游离甲苯二异氰酸脂(TDI)。
- Ingredients: Deionized water, glycerin, squalane, siloxane, polyacrylic acid copolymer, chamomile, HA, imidazolidinyl urea, VE, essence, etc. 主要成份:去离子水、甘油、角鲨烷、硅氧烷、聚丙烯酸共聚物、洋甘菊、透明质酸、烷基咪唑脲、维他命E、香精等。
- The catalysis of big pore strong acid resin for 1,4-butanediol dehydration to tetrahydrofuran is investigated. 考察了大孔强酸性树脂对1,4 丁二醇脱水制四氢呋喃的催化作用。
- Hence the compress strength of GIC increasing with aging may be due to reaction of Ca2+, Al3+ with polyacrylic acid will lasting a very long period. 结论:玻璃离子水门汀强度随时间延长而增加的原因主要在于Ca2+、Al3+与聚丙烯酸间的反应将持续一个相当长的时间,使基体交联密度增加,强度上升。
- Made from thermoplastic acrylic acid resin,color,organec solvents and addictives. 由热塑性丙烯酸树脂、颜料、有机溶剂及助剂精制而成。
- In this paper,the super-fine tourmaline powder was modified by polyacrylic acid in order to improve its dispersivity in hydrophilous systems. 通过对超细电气石粉体的聚丙烯酸改性处理,并通过对改性前后的样品进行红外光谱分析分析了改性机理。
