您要查找的是不是：
- powder sintered material 粉末烧结材料
- Method for determination of density of metal powder sintered materials 金属粉末烧结材料密度的测定方法
- Adopting titanium powder sintered filter core,usually used for prefiltration or inter filtration. 使用的是钛粉末烧结滤芯，一般用于粗滤芯或中间过滤。
- Case and the shift fork all adopt the aluminum alloy,part of components adopt the sinter material,which realize the light. 壳体、换档拨叉全部采用铝合金，部分零件采用烧结材料，实现产品轻量化。
- Dalian Electric Quartet started in 2001 and silicon carbide-wide research and development of ceramic friction, bearings, bearing kits, thrust plate are SSiC sintered material. 大连四方电泵从2001年开始进行全碳化硅陶瓷摩擦副研究开发，轴承、轴承套、推力盘均采用无压烧结SSiC材料。
- In this paper,densification laws of rotary forging powder sintered preforms and the property of components have been investigated with orthogonal experiment method. 本文利用正交实验等方法在自行设计的实验装置上对粉末烧结体的摆辗致密规律及压实体的性能进行了研究。
- The upsetting test of metal powder sintered preform by blow speed of the hydraulic press,crank press,pneumatic hammer and high energy rate forging hammer was reported. 研究了用液压机、曲柄压力机、空气锤及高速锤的打击速度对粉末冶金烧结体进行的镦粗试验。
- It is also showed that,by the second warm compaction,the monophase Cu-Ni solid solution is easier,Cu powder and Ni powder sinter has higher density and hard. 结果发现,在铜粉和镍粉反应过程中,二次温压对烧结体显微组织、密度和硬度有重要的影响。
- Metallographic structure of copper coated graphite powder and sintering material were analyzed and the reason of the material having high conductivity was illust... 本文还分析了这种钢镀覆石墨粉末及其烧结材料的金相结构，解释了材料的高导电性的原因。
- The results indicated: the porous metal material was shaping by balling and felt powder sintering under the local laser high energy. 试验结果表明:多孔金属材料是在激光局部高能量烧结下球化并粘接成形。
- Influence of ultrafine Fe-Cr powder on properties of Fe-based sintered material 微细铬铁粉对铁基烧结材料性能的影响
- The influence of change in sintering material structure to sinter RDI is introduced,the experiment result compared and analyzed,the reasonable burden offered. 介绍了石钢烧结原料配比变化对烧结矿RDI指标的影响情况,通过实验结果进行了对比分析,指出了合理的烧结原料结构配比。
- The novel yielding criterion for porous materials is employed to study the densification, workhardening and poisson's ratio of sintered materials during plastic processings. 应用作者新近提出的多孔材料的屈服准则，研究了粉末冶金材料在塑性加工过程中的致密化、加工硬化和泊松比及复压过程中的力学问题。
- Especially several high cobalt containing sintered materials are used as exhaust valve seat insert materials because(it s) high wear and heat resistant properties. 特别是,一些高钴烧结材料由于耐磨耗与耐热性高而广泛用作排气阀座圈材料。
- The reform process of sintering material mixing ground and its effect in Xingtai Iron and Steel Company is introduced. 简要介绍了烧结混匀料场的改造工艺及投产后的生产效果，对混匀料场的达产达效做了一些新的探索。
- We have perfect technics on Tungsten Carbide Jewelry manufacturing from design, mould, powder sintering to final polishing. 从产品设计到模具制作以及粉末烧结，直至最后基体的精准切削，都有一整套完善的工艺体系和工艺纪律。
- Considering the melting point and the hardness, SW-1 may be the proper laser sintering material in the field of Maxillofacial Prosthetics. SW-1与现有隆源激光烧结成型蜡相比,熔点与硬度有很大降低,而与常用型红蜡片接近,有应用于颌面缺损修复领域的可能性。
- Powder sintering: mixture, powder manufacturing, blending, pressing and vacuum or anti-vacuum sintering for all kinds of samples. 粉末烧结：各种粉末样品的配料、制粉、混料、压制、真空或非真空烧结等。
- The material is flawed throughout. 这种材料到处是裂缝。
- Fabrication of Ti_(3)AlC_(2) with different starting mixture powders sintered by hot pressing(HP) was studied. The results show that the single-phase bulk Ti_(3)AlC_(2) with high density is difficult to be fabricated with Ti,Al,C powders by HP. 热压烧结不同原料制备Ti3AlC2,结果表明:热压烧结Ti,Al,C原始粉很难得到高纯致密的Ti3AlC2。
