您要查找的是不是：
- power amplifier assembly 功放组件
- Design of Multistage Power Amplifier in Ku Band. Ku波段多级功率放大器的研制。
- Purpose: Medium power amplifier applications. 用途:用于中功率放大。
- Purpose: Audio frequency power amplifier applications. 用途:用于音频功率放大。
- Connect the Power Amplifier to Analog Channel B of the interface. 将功率放大器连接到接口上的模拟通道B。
- Purpose: Strobo flash, medium power amplifier applications. 用途:用于闪光驱动,中功率放大电路。
- In the end, it introduced a new type class-d power amplifier DPPC. 本论文所完成的开关功放已完成样机试验。
- Purpose: Power amplifier applications, vertical output applications. 用途:用于功率放大和帧频输出。
- The power of the modulated carrier wave is increased by the RF power amplifier. 射频功率放大器增加了调变载波的功率。
- Purpose: Strobe flash applications, general power amplifier applications. 用途:用于闪光灯闪光驱动,一般功率放大。
- Purpose:Low frequency power amplifier,medium speed switching applications . 用途:用于低频功率放大及中速开关。
- I'll demonstrate how to use the power amplifiers? 我来示范一下如何使用这个功率的放大器。
- Actuation of one clutch provides positive torque to the final drive, the capstan acting as the main power amplifier. 一个离合器的作用是给最后一级传动机构，即作为主功率放大器的绞盘，提供正向力矩。
- Wide-band is the main trends of development of power amplifier, which is key component of broadband RF front end. 摘要功率放大器是射频前端中的关键部件，宽带是目前功率放大器的主要发展趋势。
- If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated. 如果连接一选购的电源放大器而不使用内置放大器，将不发出哔声。
- The SD may potentially be applied in both a voltage amplifier stage and in a power amplifier stage. 潜在的应用都可能处在一个电压放大器阶段、一个功率放大器阶段。
- The ideal power amplifier would be supplied pure DC power ONLY from the power supply. 理想的功放是纯直流电源供应只是供电。
- Design of Test System for Logarithmic Amplifier Assembly 对放组件测试系统设计
- This terminal is to output signals to external constant-voltage power amplifier. 输出到外部定压功放,用于大厅、走廊、室外等扩声范围较大的区域。
- The application of the EDA simulate software Multisim 2001 was applied in a power amplifier of electronic design. 以功率放大器电路设计为实际例子;研究了EDA工具软件Multisim2001在电子设计中的应用 情况.
