您要查找的是不是：
- Effective Power Flux Density EPFD 有效功率流密度
- minimum usable power flux density 最小可用功率通量容度
- limiting power flux density 极限功率通量密度
- maximum power flux density 最大功率通量密度
- high power flux density 大功率通量密度
- usable power flux density 可用功率通量密度
- low power flux density 低功率通量密度
- spectral power flux density 功率通量谱密度
- power flux density 功率通量密度
- I've isolated the reverse power flux coupling. 我已经隔离反向电流接合
- A unit of magnetic flux density equals to 1 maxwell per square centimeter. 一种磁通量密度单位，等于每平方厘米麦克斯韦。
- And the GSR flux density will increased in the last decade of 20 centuries. 20世纪后10年年平均总辐射通量密度有增大的趋势。
- Compared with traditional motor, Halbach motor has higher air-gap flux density and lower rotor yoke flux density, which attributes to higher power density. 与径向电机相比，Halbach电机气隙磁密增大，转子轭部磁密减小，可有效提高电机的功率密度；
- A pulsed magnet with 10 mm in bore diameter and a pulsed duration of 10 ms is designed, which can generate the magnetic flux density of 60 T. The behavior simulation of this magnet supplied by different pulsed power modules is also presented. 本文对一个内径为10mm、能产生60T场强、持续脉冲时间为10ms的强磁体的相关参数进行了设计计算,并对该强磁体在不同脉冲电源条件下的电特性行为进行了仿真。
- Abstract: Powder core has high saturation flux density and excellent motion linearity of DC bias. 摘要：磁粉心具有较高的饱和磁通密度和较好的直流偏磁动态线性。
- The time-resolved neutron flux density measurement system on HT-7 Tokamak is presented in the paper. 本文介绍了HT 7超导托卡马克上的时间分辨中子注量率测量系统。
- In particular, approximate expressions for the air gap flux and the airgap flux density are derived. 特别是，近似表达式气隙磁通和气隙磁通密度的计算公式。
- The expressions for the incident and reflected power flux over the SIL facet are then used to calculate the transmissivity. 在稳相近似下得到入射到SIL底面以及反射的光能积分表达式，从而求出SIL的透过率。
- Because of their high flux density and superior temperature stability, cast magnets have been accepted in the widest range of application. 由于它们的高通量密度和优越的温度稳定性，铸造磁体已被接受的范围最为广泛的应用。
- The results showed that shielded screen can regulate the magnetic flux density distribution to assure melt in ideal state in forming inductor. 结果表明:屏蔽罩能够调节成形感应圈内的磁场分布,使成形感应圈内的熔体处于合理状态;
