您要查找的是不是：
- Major in PET preform mould,cap mould and blow mould. 专业生产瓶坯模具;瓶盖模具和吹瓶模具.
- Cooling time dominates cycle time in thick-wall moulding like preform moulding. 属厚壁注塑的瓶坯，冷却时间支配着周期时间。
- An 8-cavity preform mould costs more than the injection moulding machine that holds it. 八腔以上的模具价钱比注塑机还要高。
- Cooling time dominates cycle time in thick-wall moulding like preform moulding . 属厚壁注塑的瓶坯，冷却时间支配着周期时间。
- The disadvantages of injection stretch blow moulding is difficult to add handle and expensive preform mould, which has a long delivery time. 注拉吹的缺点是不易加手柄，注塑模具昂贵，而且交货期长。
- HuiYuan mould Industry have been concentrate on researching and manufacturing PET preform mould, blo... 发布者：徐卫萍所在地：浙江台州市行业：机械及行业设备职位：外销员工作年限：二年以上
- HuiYuan mould Industry have been concentrate on researching and manufacturing PET preform mould, b... 发布者：徐卫萍所在地：浙江台州市行业：机械及行业设备职位：外销员工作年限：二年以上
- Most preform moulds are rectangular and are longer than they are wide. 大多数的瓶坯模具呈长形，就是长度比阔度大。
- Their preform moulds could be 2-cavity based and use a hot plate or hot runner design. 模具有用两腔的，采用热板/热流道设计。
- Multi-cavity preform moulds do not use the cold runner design. An often-used design for the runners is hot plate design. 多腔的瓶坯模具都不采用冷流道的。较简单的流道是热板设计。
- Bread tends to mould in damp weather. 气候潮湿时，面包容易长霉。
- The metal in the mould hardened into shape. 模子里的金属硬化成形。
- cooling the preform mould by chiller instead of water tower could reduce the cycle time by 10%. 以冰水冷却瓶坯模具比水塔水冷却缩短冷却时间10%25
- Wet the clay a bit more before you start to mould it. 把泥再弄湿点再动手塑造。
- preform moulding 塑坯模制法
- Condensate will leavemarks on the preform surface. 露水会遗留痕迹在瓶坯的表面上。
- Condensate will leave marks on the preform surface. 露水会遗留痕迹在瓶坯的表面上。
- Moulding machines with green sand. 要有机械潮模砂造型。
- SHANGHAI JINDE PRECISION MOULDING CO., LTD. 上海锦德精密模具成型有限公司。
- The mould in which they were made is broken. 塑造它们的模型已毁。
