您要查找的是不是:
- pressure tap hole 压力表接口
- pressure tapping hole 测压孔,取压分接管
- The process of recovery of refractories for ladle and the application of recovery material in blast furnace tap hole clay are introduced emphatically. 重点介绍对用后钢包浇注料的回收工艺及回收物料在高炉铁口炮泥中的应用。
- Pressure taps should be sufficiently large. 测压孔应该足够大。
- White - hot liquid iron is running off through the tapping hole. 白灼的铁水从出铁口流出。
- White-hot liquid iron run off through the tapping hole. 白灼的铁水从出铁口流出。
- To prevent clogging of the pressure tap by fire solids gas is bled into the bed at low velocity at the taps. 为了防止测压管嘴被微细颗粒堵塞,在管嘴处以低流速向床内注入气体。
- White - hot liquidiron runs off through the tapping hole. 白灼的铁水从出铁口流出。
- White - hot liquid iron runs off through the tapping hole. 白灼的铁水从出铁口流出。
- To prevent clogging of the pressure tap by fine solids gas is bled into the bed at low velocity at the taps. 为了防止测压管嘴被微细颗粒堵塞,在管嘴处以低流速向床内注入气体。
- Pressure and differential pressure tap orientation shall follow the same requirements as given for orifice flange taps in Appendix I. 压力和差压接头方向应满足与附件I关于孔板法兰的相同要求。
- HF Electric Furnace Tap Hole Fillers HF电炉出钢口填料
- AC Arc Welding cut "Frozen" Tap Hole 用交流弧焊机割开冻结的出铁口
- At the end of cooking, the cook closed the tapping hole for ashes of the stove to dampen down the fire. 做完饭,厨师把出灰口关上,为使火势减弱。
- At the end of cooking,the cook closed the tapping hole for ashes of the stove to dampen down the fire. 做完饭,厨师把出灰口关上,为使火势减弱。
- Actualization of Dust Collection Design of Tapping Hole and Hot Metal Pitcher of BF. 高炉铁口和铁水罐除尘的实施。
- CSM-91 valves must be installed with flow in the direction of the arrow on the valve body. Easy access to the pressure taps and handwheel must be provided. 系列CSM-91阀门必须按照阀体上的箭头进行安装,使得箭头指向与流体流向一致。安装时必须保证容易接近测压孔和手轮。
- Cut out insulation around pressure taps so that when diagnostic checks are required, plugs are visible when outside shell is removed as shown in fig. 3. 当需要进行诊断检测时,切开环绕测压孔周围的保温材料,使得外壳拆卸后能够看到塞子,如图3所示。
- Body: Hardcoat Anodized, precision machined mounting surface with tapped hole accessible from bottom side. 身体:硬膜阳极氧化,精密加工与螺纹孔安装从底部可接近表面。
- forward end of motor, showing igniter connection and pressure tap ; 着年底汽车,显示点火器连接和压力塔;