该词条未找到_海词词典

您要查找的是不是：

Mesh must have pressure sensitive adhesive backing added to one side. 网格一侧背部需有压敏粘性贴。
SILGRIP? PSA950 pressure sensitive adhesive is a toluene solution of phenyl based polysiloxane gum and resin. PSA950 是苯基基础之聚矽氧烷树胶和树脂的甲苯溶剂感压胶。
Please note: You must be able to provide the pressure sensitive adhesive backing in addition to the fiberglass mesh. 备注:贵方提供的玻璃纤维网格背部必须有压敏粘性贴。
The effects of tackifing resin, surface active agent on properties of pressure sensitive adhesive wre studied. 并研究了增粘树脂、表面活性剂对压敏胶性能的影响。
In this paper, acrylic multi-copolymerization emulsion pressure sensitive adhesive (PSA) was prepared by using reactive emulsifier and their influence factors were studied. 采用反应性乳化剂制备丙烯酸酯类多元共聚乳液,探索各因素对乳液及压敏胶性能影响。
Coating and laminating of: multi-layer films (extrusion coating); synthetic leathers; pressure sensitive adhesive tapes; barrier layers; abrasives. 我们的产品代表了平膜生产流程连续在线厚度或重量测量的最常见方法。
It is a new method preparing pressure -- sensitive adhesive, with good repeated stickness, with acrylate as main monomer, by suspension polymerization. 利用悬浮聚合工艺制备压敏胶是一种新颖的方法。
As an expert in surface coating and pressure sensitive adhesive film technology,Brady is dedicated to provideing integrated solutions for customers. 作为全球表面涂层和压敏胶膜技术的专家、贝迪致力于向客户提供集成解决方案。
It is widely used in alcohol-soluble and water-soluble poly membrane adhesive, pressure sensitive adhesive, plastic printing ink, and electronic flux, etc. 、可广泛用于醇溶性及水溶性复膜胶、敏胶、料印刷油墨、子助焊剂等。
Methods Drug-in adhesive patches of amlodipine besylate were prepared by dissolving amlodipine besylate and different enhancers into the homemade pressure sensitive adhesive. 方法将苯磺酸氨氯地平及各种渗透促进剂直接溶于自制压敏胶中制备压敏胶分散型贴剂；
A new type of acrylic emulsion pressure - sensitive adhesive was prepared by using hydroxypropyl aery-late and N - methylol acrylamide as cross - liking monomers. 选用丙烯酸羟丙酯和N-羟甲基丙烯酰胺作为交联单体参与丙烯酸酯共聚,研制出一种新型的丙烯酸乳液压敏胶。
Using styrene-isoprene block copolymer(SIS)as the base material and some auxiliary additives,the SIS-based hot melt pressure sensitive adhesive(HMPSA)was prepared. 以SIS为主体原料,配合增粘树脂、增塑剂、防老剂等研制出SIS热熔压敏胶。
UV curing polyacrylate pressure sensitive adhesive was synthesized by core-shell polymerization, at the same time,chain transfer agent NDM was added for controlled reaction rate. 在常温下涂布后直接紫外光交联固化,考察了光引发剂、交联剂、光固化时间等因素对UV固化压敏胶综合性能的影响。
The influences of photoinitiator, crosslinking agent and cure time on the properties of UV curing pressure sensitive adhesive were discussed in the paper. 在常温下涂布后直接紫外光交联固化,考察了光引发剂、交联剂、光固化时间等因素对UV固化压敏胶综合性能的影响。
This paper introduces the technique of pressure sensitive adhesive tape in use for medicine made by ourselves,analysis the technical difficulties,and then gives the choices and control methods of some targets in the process technique. 介绍了自行研制的压敏型医用胶粘带的生产工艺，分析了工艺流程与技术难点，给出了生产工艺中一些指标的选择与控制方法，应用此技术研制的新药贴膏已获国家专利.
The result of experiment showed that the antiaging effect of the composites was good, and usingthis antioxidant could solve the aging of SIS in thehot melt pressure sensitive adhesive. 结果表明：新型防老剂抗老化效果较好，可解决热熔压敏胶中SIS的老化问题。
The process for solvent rubber presure sensitive adhesive and emulsion presure sensitive adhesive transfered to foam patch was also investigated. 研究了橡胶溶剂型和丙烯酸酯乳液型压敏胶对橡胶泡沫切片的湿法转移施胶工艺;
Adhesive lettering: A form of typesetting in which the alphabet is printed on a thin sheet of acetate or other material which are coated at the back with pressure sensitive adhesive. 粘贴字:可作排字用。每个字线先印在薄胶片或其他材料上，底部则涂上压感胶粘剂。
A polyacrylate emulsion used for pressure sensitive adhesives (PSAs)was synthesized by seeded semi-continuous emulsion multicopolymerization. 采用预乳化半连续聚合工艺,制备了乳液型聚丙烯酸酯类压敏胶。