您要查找的是不是：
- pressurized gas pumping system 压气抽运系统
- Biodiesel fuel tank connected to a gas pump. 生物柴油的油箱连接到气体泵。
- What pressurized gas do you want to use to deliver the anesthesia? 您希望使用何种压力气体来输送到麻醉机上?
- VVVF technique is the key technique for intelligent pumping system. 变频调速技术是智能化抽油系统的关键技术。
- The Pump system was innovative during its time. 泵系统在其时间期间是革新的。
- For a complete system with a pulsed MCP and pumping system. 整套带脉冲MCP探测器及泵浦系统可以提供。
- I want Scofield's and Burrows' pictures on each and every gas pump. 我希望S和B的照片贴在每个加油站上。
- Pumping system: with reliable performance and high-efficiency inhalation. 泵送系统：泵送系统性能可靠、吸入效率高。
- All the gas pumps were occupied. 所有的气泵都在使用中。
- Remember, I'm only a "gas pumper. 还记得吧，我只是个‘加油工’而已。
- In charge of one of the gas pumping units I found Georgi, a wiry, bearded man in his 40s. 我找到了其中一个气泵的负责人乔奇。他是个瘦高个，留有胡子，四十岁左右。
- Rescuers need to make sure they don't cut the pressurized gas canisters that would inflate an airbag, or the battery cables in a hybrid. 救援人员需要确保他们不会切到受压的汽油罐，那样会导致气囊充气；
- The choice of pumping system depends on required pumping speed, ultimate pressure attainable(in a reasonable time). 泵系统的选择取决于所需要的抽速，能达到的极限压强（在适当的时间内）。
- The surface stress is measured.The steelschromized ionically and by low pressur gas without glow discharge respectively. 对T10钢渗层组织进行了有无辉光放电作用的对比。
- A comprehensive mathematical model for simulation of dynamic parameters of beam pumping system. 游梁式抽油系统动态参数仿真的综合数学模型。
- At last I combine wind energy and high pressure gas. 就把风能和高压气体结合在一起。
- APR Test Tool String Optimizing Used in High Pressure Gas Well. 高压气井进行APR测试工具串的优选
- The government caused a price freeze at the gas pumps. 政府冻结了汽油泵的价格。
- At the appropriate pressure, the chamber is opened to a high-vacuum pumping system that continues to reduce the pressure of the process chamber. 在适当的压强下，工艺室被接通高真空泵系统抽气，以继续降低工艺室的压强。
- Fourka, M. and Bonis, M., “Comparison between Externally Pressurized Gas Thrust Bearings with Different Orifice and Porous Feeding Systems”, Wear, Vol.210, 1997, pp.311-317. 蔡龙升，“具自动补偿与微细化节流器之气体轴承开发”，中正大学硕士论文，2000。
