您要查找的是不是:
- The tensile, creep and stress-rupture properties at high temperature of a cast nickel-base superalloy K46 without cobalt, as comparison with superalloy K412, were investigated. 研究了一种无钴镍基铸造高温合金K46的高温拉伸、蠕变和持久性能,并与K412合金进行了比较。
- Close cousins terbium and dysprosium are added in smaller amounts to the alloy to preserve neodymium's magnetic properties at high temperatures. 它的近属铽和镝在这种合金中也占有类似的比例,用以在高温下保持钕的磁性。
- Bitumen modification: The low temperature flexing and anti-flowing property at high temperature of bitumen can be improved by adding 3% to 15%(wt%) SBS. 沥青改性:在沥青中加入3%25?15%25的SBS可改善沥青的低温屈挠性和高温抗流动性能。
- We have found that it cross-links only at high temperature and the mechanical properties at high temperature andglass transition temperature(Tg) of radiation crosslinked FPI are improved remarkably. 本文发现它能在高温辐射下交联,交联后的含氟聚酰亚胺的玻璃化转变温度以及高温力学性能有明显提高。
- mechanical properties at high temperature 高温力学性能
- Stress rupture properties at high temperature EB-PVD
- Glass melts at high temperature. 玻璃在高温下熔化。
- mechanical property at high temperature 高温力学性能
- The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength. 切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
- Excellent insulation at high temperature, long service life. 优良的高温约缘性能、使用寿命长;
- Vinified at high temperature to extract colours and aromas. 在高温下酿制以汲取色泽和果香。
- High resilience and low shrinkage at high temperature. 高温状态下纤维回弹强,收缩小;
- It is found that the sintering properties of andalusite can be enhanced obviously by addition of magnesia, especially at high temperature. 结果表明:加入氧化镁可明显促进红柱石的烧结,在高温阶段其作用更加明显,但其质量分数必须严格控制,不宜超过2%25。
- Glass and ceramics also have high volume resistivity, but poor surface properties at high humidity and often-poor piezoelectric properties. 玻璃和陶瓷也具有很高的体电阻率,但是在高湿度下表面电阻率性质较差,并且其压电性常常也较差。
- The results show that superior heat intensity properties of alumina-based ceramic core resulted from crystal group of mullite at high temperature. 结果表明,氧化铝基陶瓷型芯具有优良的热强性能归因于高温下莫来石柱状晶群的存在。
- Combustion at high temperature causes decomposition to nitrogen and water. 氨在高温下燃烧分解成为氮和水。
- Hard as the metal is,it can be changed into liquid at high temperature. 金属虽然很硬,但在高温下可以变成液体。
- Titanium is strong enough to withstand heavy loads at high temperature. 钛有足够的强度,在高温下经得起负荷。
- The physical properties of aluminium alloy 6082 cast ingot at high temperature, heat process for hot rolling, hot rolling schedule and side rolling process were researched. 研究了6082铝合金铸态高温性能,热轧过程的加热制度,热轧道次压下量和滚边工艺,确定了热轧工艺参数。
- Suitable folr felalspar glazes, reductive firing at high temperature. 适合长石釉,高温还原烧成。