您要查找的是不是:
- pulse output power 脉冲输出功率
- peak pulse output power 峰值脉冲输出功率
- The output power can never equal the input power, for there are always losses. 输出功率绝不能等于输入功率,因为总存在着损耗。
- Output power is stable, it can work in all weather. 输出功率稳定,可全天候工作;
- Build & test the controller to verify the correct pulse output. 构建和测试控制器以验证正确的脉冲输出。
- Adaptive output power minimizes interference. 可变的电源输出使干扰减小到最
- The system can calibrate pulse output and analog output flow meters. 本系统对脉冲输出和模拟输出的流量计均可进行校验。
- The optical pulse activecirculating replicator using optical amplifier is suitable for generating a sequence of pulse trains with precise periodicity and high output power. 指出了有源循环式光纤延迟脉冲复制器适合于产生重复周期准确、输出功率大的光脉冲序列。
- High output power, steady energy, adjustable, deep marking . 激光输出功率高,能量稳定,连接可调,深度雕刻。
- The span of wavelength is 0.6 nm,and output power is 8 dBm. 室温下;相关实验获得激光双波长间隔0.;6 nm;输出功率8 dBm。
- Power gain (18) The ration of output power to input power. 功率增益(18)輸出功率對輸入功率之比值。
- The Mechanism of Sudden-change of Output Power of TF CO2Laser[J]. 引用该论文 陈培峰;丘军林;龚志伟;唐宗化;陈义红;陈涛.
- Integrating devices use the photo cell pulse output to determine total amount of turning. 积分装置利用光电池的脉冲输出来确定旋转的总量。
- The principle and main circuit design ideas are given for the mobile pulse output module tester. 介绍了便携式脉冲输出模块测试仪的原理和主要电路设计思想。
- The output power can never equal the input power,for there are always losses. 输出功率绝不能等于输入功率,因为总存在着损耗。
- Abstract: The traditional methods calibrating meter-factor of flowmeters with pulse output are volume measure,weight measure and so on. 文摘:校准脉冲输出型流量计仪表系数的传统方法有容积法及称重法等。
- With sine pulse output,the instrument has a wider range of therapy through choosing the use of continuous waves and pulse wave. 本机具有正弦、脉冲输出,有选择地使用连续波和脉冲波扩大了治疗的范围。
- Stabile Output Power strengthens Lamp Lifespan and keep color temper coherence. 输出功率稳定,增强灯泡寿命,及色温一致性。
- Two pulse outputs, one for active power and the other selectable between reactive and apparent power with programmable frequency. 两路脉冲输出,一为有功功率,二为无功率或视在功率,带频率编程功能。
- The RF output power level is maximum for 13.5 VDC and minimum at 2 VDC. RF功率输出的是在13.;5V时候最大,而在2V时候最小。