您要查找的是不是：
- Pulsed Laser Deposition using Excimer Lasers. 应用准分子激光器的脉冲激光沉积。
- Using sintered B4C as target material, ternary BCN thin films were synthesized by means of pulsed laser deposition assisted by nitrogen ion beam. 以烧结B4C为靶材料、在氮离子束辅助下用脉冲激光沉积方法制备了三元化合物硼碳氮(BCN)薄膜。
- The growth of ABAC structured film by means of pulsed laser deposition was simulated by the Monte Carlo procedure. 摘要采用蒙特卡罗方法计算机模拟脉冲激光沉积ABAC结构薄膜生长。
- BaTiO_3/SrTiO_3 (BTO/STO) multilayer films have been fabricated on Pt/Ti/SiO_2/Si substrates by a pulsed laser deposition method. 采用脉冲激光沉积法在Pt/Ti/SiO2/Si衬底上制备了BaTiO3/SrTiO3(BTO/STO)多层膜。
- In this paper, we mainly introduce the basic principle, characters, merits and demerits of the pulsed laser deposition (PLD) technique. 本文主要介绍脉冲激光沉积技术的基本原理、特点、优点和缺点。
- And other PVD methods, such as sputtering deposition, ion beam assisted deposition, and pulsed laser deposition, are also used to prepare BCN thin films. 同时，各种PVD方法也被用来制备硼碳氮薄膜，如溅射法、离子束辅助沉积和脉冲激光沉积等。
- The work contains the following aspects: 1.Describe the process of the fabrication of titanium dioxide thin film using a magnetron sputtering and pulsed laser deposition. 内容和结论主要包括:1.;采用磁控溅射和脉冲激光沉积方法制备二氧化钛薄膜的过程。
- Pulsed laser deposition is a new technique for producing thin film in the recent years.It shows the unique advantages for the deposition of bioactive ceramic. 摘要脉冲激光沉积是近年来出现的一项制备薄膜的新技术，在制备生物活性陶瓷涂层方面显示出独特的优越性。
- Pulsed laser deposition(PLD) is a new technique for producing thin film in the recent years.It shows the unique advantages for the deposition of bioactive thin films. 脉冲激光沉积是近年来出现的一项制备薄膜的新技术,在制备生物活性薄膜方面显示出独特的优越性。
- The effects of oxygen pressure and dopant ratio on the resistivity and optical transmittance of ZnO:Al films by pulsed laser deposition have been investigated. 结果表明:掺杂比、氧分压强影响着膜的电学、光学性能和膜的结晶状况。
- The surface properties of Ti and Ti alloys can be significantly improved by laser surface modifications such as laser surface alloying(LSA), pulsed laser deposition(PLD), laser cl. 通过激光表面改性处理,如激光表面合金化(LSA)、脉冲激光沉积(PLD)及激光表面熔敷陶瓷涂层等可以显著改善钛及钛合金的表面性能。
- Abstract: Pulsed laser deposition(PLD) was used to prepare superhard amorphous carbon films.The films’ surface appearance, structure, residual stress, hardness and XPS spectra were researched. 摘 要： 用脉冲激光沉积在不同条件下制备非晶碳超硬薄膜，研究了非晶碳超硬薄膜的表面形貌、结构、应力、硬度以及能谱等。
- vertical target pulsed laser deposition(VTPLD) 垂直靶向脉冲激光沉积（VTPLD）
- Plasma assisted pulsed laser deposition 等离子体辅助脉冲激光沉积
- ZnO thin films can be deposited by various methods, such as sputtering, e-beam evaporation, spray pyrolysis, sol-gel, pulsed laser deposition (PLD), metalorganic vapor phase epitaxy (MOVPE), molecular beam epitaxy (MBE), atomic layer epitaxy (ALE), etc. 制备ZnO薄膜的方法有很多，包括：溅射方法(sputtering)、金属有机气相外延(MOVPE)、分子束外延(MBE)、脉冲激光沉积(PLD)、原子层外延(ALE)、等离子体加强化学气相沉积(PECVD)、溶胶-凝胶法(soll-gel)、喷涂热解法(spray pyrolysis)、电子束蒸发法(e-beam evaporation)等等。
- Compared with metal films deposited by sputter, deposition rate of metal film deposited by pulsed laser deposition (PLD) is much lower, because their deposition mechanism is different. 与溅射法沉积金属薄膜相比，脉冲激光的沉积率要低得多，这是因为两者沉积机制不同。
- HIGH POWER PULSED LASER DEPOSITION OF NANOMETER THIN FILMS 大功率脉冲激光纳米薄膜制备技术
- Keywords SnSe;Pulsed laser deposition;Li ion batteries;Thin films; 脉冲激光沉积;锂离子电池;薄膜;
- femtosecond pulse laser deposition 脉冲激光沉积
- Fabrication of CdS Thin Film Filter Using Femtosecond Pulsed Laser Deposition 飞秒激光制备CdS薄膜滤波器的研究
