您要查找的是不是:
- A pulsed current solenoid wiggler[J]. 引用该论文 严祖祺.
- Hence the coil can be still stable against a pulsed current shock. 因此,在遭遇大电流冲击时,线圈仍有可能保持稳定。
- So in the solution studied the HSI anode could be used in pulsed current cathodic protction system. 因此,在所研究的介质中高硅铸铁阳机可以用于方波脉冲电流阴极保护。
- A three-dimensional numerical analysis model of fluid flow and heat transfer in pulsed current TIG weld pool is developed. 对运动电弧作用下脉冲TIG焊接熔池流场与热场动态变化过程建立了三维数学模型。
- Special pulse current technology solvesthis issue well. 采用特别的脉冲电流技术能很好地解决这个问题。
- It can provide large pulse current to load for discharge. 它可为负载提供大电流脉冲放电。
- It possesses outputs of AC, DC, AC pulse and DC pulse current. 它可以输出矩形波交流、直流、交流脉冲和直流脉冲四种电流。
- The adiabatic heating model of exploding wires is used to simulate their blasting characters on strong pulsed current, andto gain the influence trends fo exploding wire numbers to their hlasting chacters. 用电爆丝绝热加热模型数值模拟了电爆丝在冲击大电流作用下的电爆炸特性,电爆丝根数对电爆炸特性的影响。
- The stepping motor of wire feeding is controlled by a pulsed current,which is output from the HSO.1 port of a 80C196KC single-chip microcomputer(SCM) and thus oscillating feeding of wire is realized. 通过改变焊接回路的电压反馈比例获得脉冲电压;利用给定电压调节短路电流;用80C196KC单片机的HSO.;1口产生脉冲波形控制送丝步进电机;形成脉动送丝方式。
- The stepping motor of wire feeding is controlled by a pulsed current, which is output from the HSO.1 port of a 80C196KC single-chip microcomputer(SCM) and thus oscillating feeding of wire is realized. 通过改变焊接回路的电压反馈比例获得脉冲电压,利用给定电压调节短路电流,用80C196KC单片机的HSO.;1口产生脉冲波形控制送丝步进电机,形成脉动送丝方式。
- A low? cyanide bright gold plating process with pulse current was developed. 开发出一种低氰脉冲光亮镀金工艺。
- The electrochemical performance of High Silicon-Iron Anodes Exerted by Square Wave Pulsed Currents (SWPCs) was studied by electrochemical. 摘要采用电化学方法和阳极消耗率评价法研究了高硅铸铁阳极在方波脉冲电流作用下的电化学性能。
- If possible, do not use offset compensation (pulsed current) because inductive reaction to the current pulse may cause unstable measurements or make autoranging difficult. 如果可能的话,不要使用偏置补偿(脉冲电流)。因为对脉冲电流的感抗可能会使测量不稳定,或者使自动量程功能难于工作。
- We suggest that widening the peak width of the pulsed current and cooling the propellant at the end of the pulse significantly improve performance of the PPT. 为了提高PPT的性能,应该延长电流脉冲峰值的持续时间,同时在脉冲电流峰值结束后,对推进剂表面进行更好的冷却。
- High Voltage Pulsed Current Stimulation 第八节、高压脉冲电疗法
- The zinc-iron alloy electroplating technology in zincate solution by pulse current was investigated. 介绍了在锌酸盐溶液中脉冲电镀锌-铁合金工艺。
- The properties of oxide-film can be improved greatly by using pulse current to anodize aluminum and aluminum alloy. 铝及铝合金脉冲阳极氧化能提高氧化膜性能。
- At last the large pulse current in a reconnection EML is measured with this system, and the result is satisfying. 最后,采用此系统测量了重接式电磁发射装置中的电流,取得了令人满意的效果。
- The transmitter was pulsed by an electron tube. 电子管使发射器产生脉冲波。
- The progress of hard anodizing investigation employing A.C. superimposed on D.C., pulse current and alternating cu... 着重评述了交直流叠加,脉冲电流和交流电源在硬质阳极氧化研究中的进展情况。