您要查找的是不是：
- pulsed spray arc 脉冲喷射电弧
- The development of thyristor puls plasma arc welding power source is introduced in this paper. 本文介绍了晶闸管脉冲等离子弧焊电源的研制成果。
- Pre-heat suggested when MIG overlay welding for large size products and use pulsed arc welding while overlay the steel. 特别适合镀锌皮的MIG焊接，用于大焊件的MIG堆焊时建议预热，堆焊钢材时建议使用脉冲电弧焊。
- Mode of Metal Transfer for GMAW (Spray arc, short circuiting arc, etc. 金属过渡方式(射流或短路等)
- For Automatic Welding-Electric Arc welding goggles and ccd imaging system. 用于自动变光电焊焊接护目镜以及看焊缝的ccd成像系统。
- Corrosion resistance and high strength. Argon arc welding of aluminum alloys. 耐蚀,强度高。铝合金氩弧焊用。
- Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用。
- A CAD system of AC arc welding transformers called AWVTCAD was studied. 本文对交流弧焊变压器的计算机辅助设计系统进行了研究，简称“AWVTCAD”，结果表明利用该系统对弧焊变压器设计，不仅能提高计算精度与速度，而且也减轻了设计者的劳动强度及降低设计成本。
- It is perfectphase trigger circuit for arc welding power source of scr. 该相控触发电路是晶闸管整流弧焊电源的理想触发电路。
- Perhaps I need to pull apart another SCR and try the arc welding approach. 也许我需要把除了另一可控硅和审判电弧焊接的办法。
- Use manual metalic arc welding, the type of electrod is A102 for material 304. 设备采用手工电弧焊，304材质焊条牌号为A102。
- Arc brazing has the characteristics of braze welding and arc welding. 电弧钎焊是近十年来才发展起来的一种新型硬钎焊工艺，兼有钎焊和电弧焊的特点。
- Such as electric arc welding, carbon dioxide gas shielded arc welding, TIG etc. 如：电弧焊、二氧化碳气体保护焊、氩弧焊等各种焊接。
- FUZZY CONTROL OF PULSED GAS METAL ARC WELDING 脉冲熔化极气体保护焊的模糊控制
- TAW-P argon tungsten pulsed arc welding 钨极脉冲氩弧焊
- pulsed tungsten inert gas arc welding 脉冲钨极惰性气体保护电弧焊
- automatic pulsed tungsten argon arc welding 自动脉冲钨极氩弧焊
- pulsed tungsten argon arc weld(ing) 脉冲钨极氩弧焊
- The problems of the peculiarities of arc welding and the estimation of weld quality are discussed. 主要考虑了弧焊特性的提取以及焊接质量的估计。
- pulsed tungsten argon arc welding 钨极脉冲氩弧焊
