该词条未找到_海词词典

您要查找的是不是：

Pyrolytic Carbon Coated Graphite Anode for Lithium Ion Battery 二元共聚物热解碳包覆的石墨负极材料
Synthetic hydroxyapatite is coated on the surface of low temperature pyrolytic carbon to enhance the bioactivity of low temperature pyrolytic carbon. 通过在低温热解各向同性炭表面再覆盖羟基磷灰石涂层来达到提高种植体生物活性的目的。
The results also show that the CVD pyrolytic carbon that has high concentration of RL has high heat conductivity. 热处理温度对材料导热系数的影响不及CVD热解炭的微观结构对其的影响。
The coated fuel particle is the key fuel element in the high temperature gas cooled reactor (HTGR). 包覆燃料颗粒是高温气冷堆燃料元件的关键组成部分。
The adhesion of SE to Pyrolytic carbon was the strongest.The adhesion of PA Kept up a high level. 表皮葡萄球菌对热解碳的粘附最强，绿脓杆菌对热解碳的粘附维持在高水平状态。
The results showed that the capacities of four types of bacteria for adhesion to Dacron, Pyrolytic carbon and PTFE coincided with the bacterial-growth curve. 结果四种细菌对三种材料粘附能力与细菌生长曲线基本一致。
Physical properties determination of the fuel kernel and coated fuel particles for HTGR[J].Nucl Power Eng,1992,13(2):69-73(in Chinese). HTGR燃料核芯及包覆颗粒的物性测试[J].;核动力工程;1992;13(2):69-73
Large isotropic pyrolytic carbon rings were fabricated by a steady fluidized bed deposition apparatus with a rotating substrate. 采用一种新的旋转基体稳态流化床沉积装置制备大尺寸的各向同性热解炭材料。
The ACFCMS monoliths consist of chopped pitch derived activated carbon fibers and pyrolytic carbon derived from phenolic resin binders. 着重考察了粘结剂的用量及活化工艺条件对产品吸附性能的影响;
At the same time,the present study situation of the microstructure of pyrolytic carbon and the progress of numerical sim... 讨论化学液气相沉积热解炭的微观组织结构和工艺的计算机数值模拟的研究进展,最后展望化学液气相致密化技术的发展和应用前景。
ZrC layers are used instead of silicon carbide (SiC) layers for fabricating a new type of coated fuel particle for the high temperature gas cooled reactor (HTGR). 为了进一步发展和开发利用高温气冷堆，用碳化锆镀层替代碳化硅镀层制备新型的包覆燃料颗粒。
It has been found that the pyrolytic carbon matrix does not merely bond mechanically with carbon fiber surface,and the interface is not a simple plane yet. 实验发现，由化学气相渗透工艺所获得的热解碳并非仅与碳纤表面进行单一的机械粘合，也不是一个简单平面。
N-doped carbon coated Fe,Co,Ni nanocrystals were prepared by an AC arc discharge method under nitrogen buffer gas. 采用交流电弧法;在氮气氛下合成了氮杂碳包金属Fe、Co、Ni纳米晶.
Recently, he is working on one national project and two local project on biocompatibility and bactericidal properties for titanium nitride nanofilm and pyrolytic carbon materials. 现正承担两项天津市自然科学基金项目和一项国家自然科学基金项目，从事钛陶瓷纳米膜和热解碳材料的生物相容性和抗菌性研究。
The adhesive capacities of four bacteria to Dacron were stronger and the adhesion of SE to pyrolytic carbon was the strongest.The adhesion of PA remained to a high level. 细菌在体外生长不受人工瓣膜材料存在的影响，不同时间同一细菌对同一材料粘附不同。
Whether asphalt carbon or pyrolytic carbon, substrate material have three-tier structures: the basic structural units (BSU), Local molecular orientation (LMO) and texture. 基体材料无论是热解炭还是沥青炭，都有三级结构，基本结构单元(BSU)、小区域分子取向(LMO)、织构；
ZHANG Bingzhong,ZHU Junguo,YANG Bing,et al.Research on photo-electronic length measuring method of coated fuel particle size for HTGR[J].J Tsinghua Univ (Sci &Tech),1999,36(11):72-74 (in Chinese). [6]张秉忠;朱钧国;杨冰;等.;高温气冷堆包覆燃料颗粒尺寸的光电测长法[J]
Fluorine carbon coating of our country is fast growi ng . 我国氟碳涂料的发展十分迅速。
Through OM,SEM,XPS and EDS,the low adherence of carbon coated tools can be attributed to the low wettability between the Al-Si alloys and carbon instead of formin... 切削过程中碳膜的热稳定性越好,碳膜刀具的寿命就越长,一旦碳膜破坏,则刀具迅速发生粘结失效。
The results showed that the mixed carbon matrix(pyrolytic carbon and resin-based carbon)C/C composites,which had the highest graphitization degree,had the best anti-ablative performances. 本文利用不同的原料和加工工艺制备出了三种具有不同炭基体的C/C复合材料,这三种炭基体分别是热解炭、沥青炭以及热解炭-树脂炭混合炭基体。