您要查找的是不是:
- quadric surface intersection 二次曲面求交
- Surface and surface intersection (551) is one of the key tasks in CAGD. 曲面求交(SSI)是CAGD中的一个重要课题。
- Conic sections and quadric surfaces. 二次曲线与二次曲面。
- Extracting quadric surface from measured data is an important problem in reverse engineering of mechanical parts. 摘要在机械产品的逆向工程中,针对测量数据提取常用二次曲面是非常重要的。
- This paper proposes for the first time to use genetic algorithm based on real-number-coding to extract quadric surface. 首次提出利用基于实数编码的遗传算法针对离散数据点进行二次曲面提取。
- On the area of actual process, It is often seen that one surface of the part is quadric surface. 在实际生产中,如果某一加工表面是二次曲面,对于这类曲面轮廓的加工常采用数控加工方法。
- An algorithm of feature surface recognition based on quadric surface fitting and geometry property was presented. 摘要提出了基于二次曲面拟合误差分析和几何属性分析的特征曲面识别算法。
- Double NURBS method is used to construct the surface model of a rotor.The technologies of surface extension, surface intersection and surface trimming are studied. 摘要采用双三次NURBS方法对某型号转子进行几何造型,对造型过程中出现的曲面延伸、求交和裁剪等问题进行了研究。
- The system can be easily employed in automatic remanufacturing of workpiece of quadric surface, with various state of surface damage. 系统适用于缺损表面为二次曲面的工件,对不同缺损程度的工件的再制造可以自动进行。
- To solve the problem of quadric surface reconstruction in reverse modeling for mechanical parts, a two-step fitting algorithm was presented. 摘要针对机械零件反求建模过程中常见二次曲面的表面重建问题,提出了曲面拟合分步计算法。
- Lastly, experiments were performed to evaluate the performance of this method in comparison with the methods using linear classifier and quadric surface. 最后,为了评估该方法的性能,分别使用线性分割器和二次曲面分割器的方法进行了对比实验。
- With the Lagrange multiplier method, the minimum distance of the center of a circle and a quadric surface was provided and the tangency condition of curve and surface was given. 利用拉格朗日乘子法求解二次曲线和二次曲面之间的最小距离,给出了曲线与曲面相切的条件。
- The Emit Trail at Surface Intersection compound emits particles from the point at which the emitter intersects with another object. 相交轨迹发射粒子复合节点是从发射器和其他物体相交处的点发射粒子。
- Using local base surface parameterization, a parametric quadric surface approximation method is used to estimate the local surface curvature properties of scattered points based on propagating normal vector direction. 首先,计算各点的邻近点集,选取合适的局部基础曲面,把邻近点集投影到相应的局部基础曲面。
- At last, the commonly methods and steps for represention quadric surfaces using NURBS was find. 最后总结出了二次曲面进行NURBS表示的一般方法和步骤。
- The distance from the origin to the point at which a line, curve, or surface intersects a coordinate axis. 截距从原点到一条直线、曲线或平面上的点的距离,与坐标轴相交
- Then, on this basement, the method of calcutating the control vertecs and weights was given while representing quadric surfaces using NURBS. 在此基础上给出了二次曲面进行NURBS表示时控制顶点和权因子的计算方法。
- Surface intersections,concaves and shallow planes of the curved surface are difficult to machine. 曲面交线、曲面内凹区域及曲面中浅平面的加工是曲面加工的难点。
- ZHU Si-fang.Design of the Second Order Quadric Surfaces Shell[J].Journal of Central South University of Technology(Natural Science), 2000, 31(4):356-359. [4]朱泗芳.;关于二次曲面薄壳的设计[J]
- The formula of the curve tangent slope at some peculiar point in the orthograph on the stereoscopic surface intersecting line and the method of making tangent are given as well. 本文通过可展曲面的微分不变量,导出可展面的曲率线与曲率特征,并以锥面和切线曲面为例阐明这些特性的几何意义。