您要查找的是不是:
- Traditional radar signal source usually fixes several sets of parameters according to system demand; exterior selects multi-waveform and different parameters,it is difficult to change the parameters. 传统的雷达信号源根据系统要求一般先固定几组信号波形数据,通过外部选择实现对多波形输出,修改参数很不方便。
- Design of Wideband Radar Signal Source Based on PCI 基于PCI的宽带雷达信号源设计
- Design of a Novel Chaotic Radar Signal Source 一种新的混沌雷达信号源的设计
- A New Design of Wide Band Radar Signal Source Based on DDS 一种基于DDS技术的新型宽带雷达信号源的设计
- Design of signal source for the general module of radar signal processing 雷达通用信号处理平台信号源的设计
- Design of frequency control circuit of a uncorrelated frequency agility radar signal source 非相参捷变频雷达信号源频率控制电路的设计
- radar signal source 雷达信号源
- Simple Signal Source based Micro Controller. 单片机简易信号源。短句来源。
- DOPPLER PERFORMANCE ANALYSIS OF INTERPULSE COSTAS FH RADAR SIGNAL ? 脉间Costas FH雷达信号的多普勒性能分析
- LFM-Costas stepped frequency radar (SFR) signal is an important radar signal. 线性调频 Costas频率步进雷达信号是一种很有研究价值的雷达信号。
- HASI will make similar measurements using radar signals. HASI也会运用雷达讯号进行类似的量测。
- In this paper, after analyzing the procedure of radar signal processing and the methods of blind source separation (BSS), a multi-step processing method based on BSS to radar anti-jamming is proposed. 本文通过对雷达信号处理过程和盲源分离技术的分析研究,提出采用基于盲源分离的多步处理抗干扰方法进行雷达抗干扰信号处理,可使雷达在复杂背景下具有更强的抗干扰能力。
- The Generating Technology of Wideband Radar Signals II. 宽带雷达信号产生技术2。
- German scientists quickly developed an instrument which picked up the radar signal and gave the V-boat warning. 德国科学家很快造出了一种能测知雷达信号并给潜艇发出警报的仪器。
- Blind source separation could be applied to many field such as communication, iatrology, image and radar signal processing.It is currently an active-research area belonging to signal processing. 盲信源分离技术可广泛应用于通信、医学、图像以及雷达信号处理等多个应用领域,已成为信号处理领域的一个研究热点。
- There will be some impedance mismatching between the signal source and the load. 阻抗之间会有一些不协调的信号源和负载。
- In this paper, a design of pseudo-code CW Rendezvous and Docking (RVD) radar signal processor is presented. 摘要介绍了某伪码连续波交会对接雷达信号处理机设计。
- In an ideal amplifier, the final stage tube acts as a signal source and the output transformer acts as a load. 在一个理想放大器,最后阶段管作为信号源和输出变压器的负载。
- Just the signal source and the load on the DC loop should share the signal power. 作为信号源和负载的直流回路功率应分担信号。
- In this paper a way of using signal's self-correlation output's envelop to detect PC radar signal is put forward. 提出了一种利用自相关输出的包络特征检测、别脉压雷达信号的方法。