您要查找的是不是:
- C3 radial internal clearance to ISO 5753:1991 (table 2). 标准C3径向内部游隙符合ISO 5753:1991(表2)。
- The narrow cam rollers have C3 radial internal clearance as standard. 标准的窄凸轮滚子有C3径向内部游隙。
- The values for the radial internal clearance conform to ISO 5753:1991. 径向内部游隙的数值符合1991年的ISO 5753标准。
- As the bearing is driven up the tapered seating, its radial internal clearance is reduced. 轴承径向内部游隙随着轴承在圆锥轴颈上的推进而缩小。
- The characteristic features of these bearings for extreme temperatures include large radial internal clearance and special cages and shields. 这种用于极端温度的轴承特征是径向内部游隙大及带特殊保持架和防尘罩。
- Most SKF multi-row full complement cylindrical roller bearings are produced with C3 radial internal clearance to ISO 5753:1991. 大部分SKF多列满滚子圆柱滚子轴承以符合1991年的ISO 5753标准的C3径向内部游隙生产。
- SKF split spherical roller bearings are manufactured with Normal or C3 radial internal clearance according to ISO 5753:1991. SKF剖分式球面滚子轴承是根据1991年的ISO 5753标准,以普通级或C3径向内部游隙制造的。
- CARB bearings are produced as standard with Normal radial internal clearance and most are also available with a larger C3 clearance. CARB轴承以常规径向内部游隙为标准制造,多数还备有游隙较大的C3组。
- Axial displacement of one ring relative to the other will gradually reduce the radial internal clearance in a CARB bearing. 一个套圈相对于另一套圈的轴向位移将逐渐减小CARB轴承中的径向内部游隙。
- Inch bearings are manufactured to Normal tolerances, according to standard BS 292: Part 2:1982 and with Normal radial internal clearance, which conforms to ISO 5753:1991. 英制轴承的常规公差符合英国标准BS 292:Part2:1982,并带符合ISO 5753:1991标准的常规径向内部游隙。
- The reduction in radial internal clearance, or the axial displacement of the inner ring on its tapered seating is used as a measure of the degree of interference. 缩小径向内部游隙或内圈在圆锥座上的轴向偏移被用作调整过盈配合程度的手段。
- The reduction in radial internal clearance, or the axial displacement of the inner ring on its tapered seating is used to determine and measure the degree of interference. 径向内部游隙的减小值、或内圈在其圆锥轴颈上的轴向位移,被用来判定和测量过盈量。
- Double row cylindrical roller bearings produced to SP tolerance class specifications have C1 radial internal clearance as standard although the clearance suffix is not shown in the bearing designation. 按照SP公差级规格标准生产的双列圆柱滚子轴承有C1的径向内部游隙,尽管在轴承型号中不显示间隙后缀。
- The method using feeler gauges for measuring the radial internal clearance before and after mounting bearings is applicable for medium and large-sized spherical and toroidal roller bearings. 轴承安装前后,用测隙规测量径向内部游隙的方法适用于大中型球面和CARB轴承。
- Radial internal clearance larger than Normal 径向内部游隙大于正常值
- Radial internal clearance less than Normal 径向内部游隙小于普通级
- Factors Affecting Radial Internal Clearance of Operating High-Speed Rolling Bearing 高速旋转的滚动轴承工作游隙影响因素的分析
- Distribution of Internal Gap Corresponding to Radial Internal Clearance of Rolling Bearing 滚动轴承径向游隙与内部间隙分布
- SKF maintenance-free spherical plain bearings are produced with a radial internal clearance as per the following SKF免维护球面滑动轴承制造时采用下列径向内间隙
- Research and Calculation of Radial Internal Clearance about Offset Printing Cylinder's Rolling Bearing 胶印机滚筒滚动轴承径向游隙的研究与计算