您要查找的是不是：
- Keywords titanium matrix composites （TMCs）;reactive hot pressing;microstructure;in situ formation;hybrid; 钛基复合材料;反应热压法;微观组织;原位自生;混杂增强;
- Keywords titanium diboride;titanium carbonitride;reactive hot pressing;microstructure;ceramic nanocomposite;reaction mechanism; 二硼化钛;碳氮化钛;反应热压;显微结构;纳米陶瓷;反应机理;
- reactive hot pressing 反应热压法
- Compressing moulding presses.., hot press... 就是液压机什么得。。。
- A new type BN ceramic material is made by hot pressing(HP) method. 采用热压（HP）法制备了BN陶瓷材料。
- reactive hot isostatic pressing (RHIP) 反应热等静压
- The powder can be directly consolidated into blocks via hot pressing. 这些粉末可以通过热压形成整块。
- Our company produce PUR reactive hot melt adhesive ,which is a semitransparent and 100% solid reactive polyurethane, by processing of heat melting to be liquid. 华特反应型聚氨酯热熔胶(PUR)是半透明100%25固体活性聚氨酯物，加热融化后变成流体使用。
- At the polyalkene Oct.1999, after the injection molding, hot press as molding. 一般以聚烯烃为主要原材料，经过注塑、热压等工艺加工成型。
- Two hot pressing shaped, Ms. Man face, schoolbags sandwich, mainly Middle Eastern countries and regions. 两次热压成型、奥古曼面、意杨夹心、主要针对中东国家和地区。
- Isocyanate-capped reactive hot melt adhesive(RHMA) based on poly(hexanediol adipate)(PHA)/poly(diethylene glycol adipate) (PDEA) and methylene di-p-phenyl diisocyanate(MDI) have been prepared. 用不同比例的聚己二酸己二醇酯 ( PHA) /聚己二酸一缩二乙二醇酯 ( PDEA)和 4 ;4′-二苯甲烷二异氰酸酯 ( MDI)合成了不同结晶含量的反应性热熔胶 ( Reactive hotmeltadhesive;RHMA) .
- The polycrystalline Na-Bata-Al_2O_3 with relative density greater than 99% has been prepared by means of hot pressing. 用热压的方法可制得相对密度大于99%25的Na-Beta-Al_2O_3。
- Ti2AlC bulk material was synthesized by hot pressing using elemental powder mixture of Ti,Al and active carbon. 以Ti、Al元素粉和活性炭为原料,采用热压工艺合成了Ti2AlC块体材料。
- TiB2-Al2O3 Multiphase ceramics with Y2O3-La2O3 as sintering aids are fabricated by hot pressing. 本文以Y2O3-La2O3为烧结助剂,通过热压烧结制备了TiB2-Al2O3复相陶瓷,研究了原料组成对材料的显微结构和力学性能的影响。
- The monoclinic celsian phase in the matrix was produced in situ,during hot pressing,from amphosous BAS. 在热压期间，基体中的单斜相钡长石由玻璃态钡长石原位转变生成。
- This article describes a hot pressing formation technology to make flanged openings on special jacketed vessel shells. 介绍在特殊夹层压力容器制造中对夹层壳体壁上进行开孔翻边热冲压成形的工艺技术。
- In this paper the porous materials were manufactured by PCH comparing with hot pressing (HP). 本文采用的导电金属和不导电陶瓷材料的球形颗粒作为原料，研究脉冲大电流加热条件下颈部的生长模型及原子扩散过程，弄清脉冲大电流加热条件下原子扩散与热压（HP）条件下原子扩散的区别，以证实特殊的电场和磁场是否对原子的扩散具有推动作用，揭示脉冲大电流加热条件下原子的扩散过程。
- Calendaring is glazing technology in coloured light oil and hot pressing two generating units. 压光是上光工艺在涂上光油和热压两个机组上进行。
- PP/straw composites are fabricated by hot pressing, with PP as matrix and wheat straw as the reinforcing agent. 以聚丙烯(PP)为基体,以农作物秸秆(麦杆)为增强剂,用热压成型的方法制备了PP/秸秆复合材料。
- The composite dielectrics mainly composed of PTFE,ceramics and glassfibers are prepared by hot pressing. 采用热压工艺制得聚四氟乙烯/陶瓷/玻璃纤维复合介质材料。
