您要查找的是不是:
- rear brake extension lever 后闸伸杆
- Inspect the front brake pads and rear brake linings. 检查前刹车垫和后刹车衬。
- Check rear brake shoe adjustment with standard brake gauge. 用标准刹车仪表检查后刹车蹄片调整。
- The brake "drum" is actually the inside part of the rear brake rotor . 所谓的制动“鼓”实际上就是后刹车碟的内侧部分。
- When braking apply the rear brake before the front brake. 应先用后煞车掣,再用前煞车掣。
- Check lining thickness on front and rear Brake pads 检查后刹车片厚度
- Brake disks are equipped in the front and back of the center differentials providing reliable braking power. Enables separate adjustment and setting of front and rear brakes. 制动盘都配备在正面和背面中心的差距提供可靠的制动能量。使单独的调整和设置的前方和后方刹车。
- With his race already compromised, he also lost speed due to a continual locking of the rear brakes when he was running new tyres. 由于他的比赛已经受到了影响,他也因为在使用新轮胎时后轮胎刹车不断地被锁住而失去了速度。
- When a certain vehicle is braking with low pressure at some speed, the instrument panel vibrates strongly for the resonance of the rear brake system and the rear suspension system. 摘要对某一车型在一定的速度范围内进行低压制动时,车的后制动系统与悬架系统发生共振,最后引起仪表台的强烈振动。
- He is repairing the brake lever of an automobile. 他正在修理汽车的刹车杆。
- Connect parking brake cable to brackets and lever. 连接到支架和操纵杆的团刹车钢索 。
- Put the gear lever in the neutral position. 把变速杆推到空挡的位置。
- He pushed hard on the brake pedal to avoid a collision. 他使劲踩下煞车踏板以避免撞车。
- He pulls the parking brake lever up. 更清楚了,是拉上那个手刹的“杆”!
- Stamping Technology and Die Design of Rear Brake Bottom-Blank 后制动器底板冲压工艺及模具设计
- He employed his knife as a lever. 他把刀子当杠杆用。
- A body of the enemy hung upon their rear. 一伙敌人紧紧地跟在他们的后面。
- Push hard and the lever will go down. 用力推就能把控制杆按下去。
- Improvement on Stamping Process for Rear Brake Hoof Support Pole 后制动蹄支持杆冲压工艺改进
- Pity is a lever for quickening love. 怜悯是加速爱情的手段。