您要查找的是不是:
- received signal level 接收信号电平
- The distorted portion of a received signal. 接受到的信号被扭曲的部分
- Intensity fluctuation of any or all components of a received signal. 接收信号的部分或所有成分的强度起伏波动。
- In PLC system,it is very important to process the received signal. 电力线载波通信系统中,对接收信号的处理是非常重要的。
- Pulse width modulation (PWM) is an analog signal level for digital encoding. 脉冲宽度调制(PWM)是一种对模拟信号电平进行数字编码的方法。
- The antenna received signals with no directivity. 那种天线可接受没有方向性的信号。
- The whole Chinese operating interface lets you control the state Of the roads, knowing signal level. 全中化作操作界面,让您充分掌握各种路况,讯号强弱分明。
- On playback, the opposite process is applied (deemphasis), based on the signal level. 播放的时候,根据信号的等级应用相反的过程(减弱)。
- NRZ encoding relies on the signal level found in the timing window to determine the binary value for that bit period. NRZ编码依据时序窗中讯号位准来决定位元周期内的二进位值。
- In radiocommunications, pertaining to variations in the received signal strength due to varying ionization conditions over the propagation path. 在无线电通信技术中,接收信号的强度由于传播通路上电离条件的改变而引起的变化。
- The MS is tried to hand over to cell D because it’s downlink signal level is higher that cell’s B. 移动基站尝试移交至传感器D,因为它的下行线信号水平比传感器B要高。
- Pertaining to a connection by which one end can only send signal and the other can only receive signal. 用于修饰两点之间的连接,这种连接的一端只能发送信号,而另一端只能接收信号
- NRZ) is a digital-to-digital polar encoding method in which the signal level is always either positive or negative. 非零编程(NRZ)是一种数字编码技术,在它的编码中要么正电平要么负电平。
- The received signal of the polarization sensitive array is proved to have trilinear model characteristics. 分析了极化敏感均匀圆阵接收到的信号,该信号具有三线性模型特征。
- The receiver employs an equaliser to reduce the ISI in the received signal. 该接收机采用的机会,以减少三军情报局在收到信号。
- A third signal level is thus now available in addition to one programmable switching point and a temperature indication. 从而得到了除可编程开关点和温度指示信号之外的第三级信号。
- In this paper,the forms of received signal in troposcatter communication are briefly introduced. 简要阐述了对流层散射通信的接收信号的形式。
- Hungary will receive signals from space. 匈牙利收到外太空信号。
- Sig (RSSI) 10) (sig) The Sig field represents the signal level in RSSI units below which a handoff to this AUTOPLEX system cell site will be denied. Sig (RSSI) 10) (sig) Sig 字段表示 RSSI 单元的信令级别,在该级别下进入该 AUTOPLEX 系统小区基站的越区切换将被拒绝。
- Traditional handoff ordering methods adopt the received signal strength (RSS) as the basis of prioritization. 摘要:传统的交递排序方法使用其所接收到的讯号强度作为订定优先顺序的基准。