您要查找的是不是：
- reciprocating spray forming 往复式喷射成形
- A nozzled tube used to apply paint in a spray form. 一种将颜料喷成雾状的喷嘴管。
- The superalloy GH742y prepared by spray forming were forged with forging ratio 45% by 1 250 t water press after HIP-ed. 用喷射沉形工艺制备的GH742y合金沉积坯,经过热等静压,在1 250 t水压机上进行变形量为45%25的镦饼成形。
- The formation mechanism of equiaxed grains and micro cavities during spray forming process are discussed. 分析了等轴晶组织和显微孔洞在喷射成形中生成的机制。
- The microstructure of spheroidal cast iron prepared by spray forming has been studied. 采用喷射成形工艺研究了球墨铸铁的显微组织。
- The microstructure evolutions during spray forming process for high magnesium aluminum alloy are investigated in this paper. 研究了高镁铝合金在喷射成形过程中显微组织的变化。
- We are interested in importing mosquito repellents, perfumed spray form please contact with details and price. 求购驱蚊水、香水喷雾，请提供相关的详细资料及报价。
- Basic mechanisms of plasma spray forming (PSF) and plasma arc cutting (PAC) ceramic with additional anode have been introduced according to generating characteristic of plasma. 通过快速制造零件和模具的实验,分析了等离子熔射成形件质量的主要影响因素;
- Multi-level swirl atomizer is a combination of multi-level and multi-atomizing spray form, with a small atomization gas and good effects. 多级旋流雾化喷嘴是多级、多种雾化方式的组合，具有雾化气量少、雾化效果好等优点。
- In this paper, the spatial variation of the mass flux and deposition rate in the spray forming process was investigated, and the distribution function was established. 本文研究了喷射成形雾化熔滴射流质量流率和沉积速率的分布规律，建立了它的空间分布函数。
- Various kinds of sensors suitable for the control of the spray forming process are introduced, including their advantages and disadvantages in actu al applicatiop.s. 系统地介绍了各种可能用于雾化喷射沉积成形过程控制的传感器技术,及其在应用中的优点和局限性。
- Such as: strawberry, apple and so on, through the bubbling, surfing and cleaning spray form of the three entered a second cleaning brush to wash fruit cleaner, more thorough. 如：草莓、苹果等，通过鼓泡、冲浪和喷淋三种清洗方式后，进入毛刷进行第二次清洗，使水果洗的更干净、更彻底。
- It was put emphasis on the application of the ultrasonic arc spray forming technique to preparation the non-equilibrium super saturation solid solutions, high performance composites reinf... 快速凝固技术的基本出发点是提高冷却速度,从而制备出性能优异的材料。
- Microstructures and wear resistance of spray formed Al Pb alloys were studied and compared with those of conventional cast Al Pb alloy. 研究了喷射沉积成形Al?Pb 合金的显微组织及耐磨性能， 并与铸态Al?Pb 合金进行了对比。
- The microstructure, recovery and recrystallization behavior of spray formed Al Al(Pb) composite plates were also studied. 同时还研究了喷射沉积成形Al?Al（Pb） 复合板的组织及回复再结晶行为。
- The critical deformation and forgeability of the spray formed superalloy were studied by wedge specimen and column specimen. 采用楔形试样和圆柱形试样分别研究了合金的临界变形和变形塑性。
- Closed loop control of spray height in tubular preparation with reciprocating spray deposition process 往复式喷射沉积管坯制备中喷射高度的闭环控制
- In this paper,the effect of HIP on the porosities and properties of two spray formed superalloys,K17 and GH742, has been investigated. 研究了热等静压工艺对喷射成形K17和GH742两种高温合金显微疏松和室温拉伸性能的影响。
- The spray formed ultra high carbon steel(UHCS)was firstly produced in the world and study on its superplasticity and microstructure after deformation was conducted. 报道了首次采用喷射成型工艺制取超高碳钢,并研究了其超塑性及变形后的显微组织。
- It was discovered for the first time that spray formed UHCS part with lamellar pearlite structure possesses superplasticity without any thermal and/or mechanical pretreatment. 利用喷射成形的快速凝固的特点，有效地避免了超高碳钢中碳的偏析问题。
