您要查找的是不是：
- I put a rectangular box on the table. 我把一个长方形的盒子放在桌子上。
- Compound die with expanding horizontal trimming and notching for rectangular box part 矩形盒形件胀开式水平切边冲槽复合模具
- rectangular box parts 矩形盒件
- He put a rectangular box on the table. 他把一个长方形的箱子放在桌子上。
- Two main part : the explorator and juke box part. 两个主要部分： explorator和juke方块的一部分。
- The system is made of hydraulic press,rectangular box drawing die of divided blank holder,hydraulic part of blank holder and control part. 该系统主要由液压机、压边圈分区的矩形件拉深模具、压边装置的液压部分以及控制部分组成。
- A computer window is the area of the screen enclosed in a rectangular box. 电脑窗口就是包围在矩形框中的屏幕的区域。
- He lit a cigarette and gazed down again at the men clustered in the rectangular box of the troop well. 他点上一支烟，又盯着看下面象个长方形的箱子的载兵舱里攒攒簇簇的士兵们。
- The finite-element code ANSYS/LS-DYNA was used to simulate the process of rectangular box deep drawing. 利用有限元软件ANSYS/LS-DYNA研究变压边力对矩形件拉深成形性能的影响。
- The face structure comprises a flat web of rectangular box sections either welded or bolted together on site. 表皮结构由一种矩形断面的平坦的网状结构焊接或者拼装而成。
- The numerical simulation result indicates that the Variable Blank-Holder force(VBHF)can improve the formability of rectangular box deep drawing. 模拟结果表明,合适的变压边力能够提高矩形件的拉深极限,改善矩形件的成形性能。
- This paper reports a practical method descrbing the box parts information, using the shape set and the shape code set, in computer aided process planning(CAPP). 介绍了箱体类零件计算机辅助工艺规划 (CAPP)关于零件信息描述及处理的一种实用方法 ,利用形面集及形面代码集对箱体类零件加工信息进行描述。
- Outside the underbelly had the obvious change, the sound box part has used the raised arc design, served as contrast the screen is more prominent. 机身下部有了明显变化，音箱部分采用外凸的弧形设计，把屏幕衬托的更加突出。
- The longhouse was a rectangular box built out of poles, with doors at each end and saplings stretched over the top to form the roof, the whole structure being covered with bark. 它是由一些支杆筑起的长方形盒式建筑，每端都有门，小树向上伸展形成屋顶，整个结构用树皮覆盖。
- Finally, with the programming tools of VC++ and ObjectARX in the AutoCAD environment, the box part is used as an example to test the validity of this method. 最后,以箱体类零件为例,在AutoCAD环境下利用VC++和ObjectARX开发工具编程验证了该方法的有效性。
- Some examples are given, showing that density stratification can have a large effect on the added mass and damping of the floating rectangular box in a two-layer fluid over a range of frequencies. 对所建立的求解模型进行了数值计算分析，结果表明在矩形箱浮体的某个振荡频率范围内，流体的分层效应对其附加质量和阻尼系数有显著影响的。
- At the same time can work with the four nose, a rectangular box to complete a welding processing, computer control system, stepping motor bearings straight, vice imported components. 具有能同时工作的四个机头，可一次完成一个矩形框的焊接加工，计算机控制系统，步进电机直线轴承副采用进口元器件。
- Bounding Box - Objects aren't drawn at all; instead, this mode shows only the rectangular boxes that correspond to each object's size and shape. 边界框模式-物体不会被绘制;相反，这种模式绘制出矩形盒表现物体的大小和形状。
- THE DESCRIPTION METHOD OF BOX PART 箱体零件信息描述方法的研究
- rectangular box with inclined bottom surface 斜底盒形件
