您要查找的是不是:
- pin fin heat sink 柱鳍热沉
- Thermal-characteristic analysis of the plate fin heat sink 型材散热器热特性分析
- Research on Thermal Performance of Plate-Pin Fin Heat Sink 高效翅柱复合型散热器的流动与散热性能研究
- Wirtz, R. A., Chen, W. snd Zhou, R., “Effect of Flow Bypass on the Performance of Longitudinal Fin Heat Sinks ,” Transactions of the ASME, vol. 116, p 206-211, 1994. 参考文献[1]彭相武,应用大涡漩数值模拟于引擎气缸内之紊流流场与热传现象之研究,国立成功大学造船及船舶机械工程研究所博士论文,2002。
- Jansson, H., and Palm, B., ”Thermal and Hydraulic Behavior of Plate Fin and Strip Fin Heat Sinks Under Varying Bypass Conditions”, The Sixth Intersociety Conference on, 1998. 李雅雄,笔记型电脑散热系统之主动式热沉最佳化设计,交通大学机械工程系硕士论文,2001年。
- Due to the general derivation, the longitudinal fin arrays on a heat sink can have either square, rectangular, equilaterally triangular, or cylindrical cross section. 这个研究是针对纵长型的散热器在已知体积与鳍片数目以及一边的深度,求长方形鳍片的长度与宽度与横截面积。
- Study of fin edge shape of plate fin heat sink in forced convection cooling 强制风冷板翅式散热器肋片边缘形状的研究
- Measurements of heat transfer and pressure drop in the short pin fin array used in trail cooling channel of turbine blade have been performed. 采用放大的模型对装有五排短扰流柱的涡轮叶片尾缘的冷却通道的流阻特性及通道端壁表面上的局部换热系数进行了测量,重点研究了扰流柱直径及形状的影响。
- fin heat sink 翅片散热器
- plate fin heat sink 平板散热器
- Your organization should provide sufficient electricity supply (2 x 13-ampere single-phase power rectangular pin sockets) for the Mobile ERC. 申请机构须提供足够的电力(2个13安培单相方脚插头)予流动环境资源中心车辆使用。
- How to select the suitable heat sink? 如何选择合适的散热片?
- We want to purchas heat sink ,please contact us. 求购温控器,请生产厂家联系我们。
- The heat transfer performance of plate fin and staggered heat sink is comprehensively analyzed by the use of quality factor "F" which is a non-dimensional variable. 本文引用无量纲品质因数F,分别对平板和叉排散热器的换热性能进行了综合分析。
- Very high heat sink capacity of the MEPCM was found by DSC method. 最后的dsc热分析表明了MEPCM具有很高的蓄热能力。
- Experimental investigation of flow resistance and beat transfer characteristics has been carried out on a typical lamilloy model whose ratio of inlet bole, pin fin, and outlet hole is 1: 4: 1. 摘要对进气孔、扰流柱和出气孔个数之比为1:4:1的典型层板冷却结构的流体流阻与换热特性进行了实验研究。
- Electronic parts: heat sink copper holder, fiber coupler body. 电子零件:散热器铜座,光纤连结器本体.
- Zhenjiang East Asian heat sink, the transistor, resistor. 镇江东亚散热片,二三极管,电阻。
- It has been experimentally investigated the effects of drop-shaped pin fins on heat transfer and pressure loss for the blade trailing of turbomachinery. 对滴形扰流柱对透平机械尾部换热及阻力的影响进行了实验研究,讨论了柱体形状及排列方式的影响。
- The paper analyzed and discussed two-dimensional heat sink in theory. 本文对二维的热沉问题进行了理论分析和讨论。