您要查找的是不是：
- reel tine covering plate 拨禾轮拨齿横遮板
- The injection mould for a duplicator cover plate is designed. 设计了复印机盖板的注塑模具。
- Reattach cover plate to make an air and water tight seal. 重新固定盖板，并紧密密封防止空气和水通过。
- Bolted cover plate to protect seal and cylinder from the ingress of debris. 上盖板可防止杂物进入缸筒损坏密封。
- Disconnect the hose from the bottom cover plate to the relief valve. 断开底部盖板到安全阀上的软管。
- Bottom insulation of the depolarisation electrode as well as upper covering plate usually consist of card board coated with hydrocarbon waxes. 底部电极的绝缘物和顶部的金属盖片通常是由有碳氢化合的蜡涂层的纸板制成。
- Remove the cover plate of the relief valve by removing the four connecting screws. 通过拆卸四个连接螺丝来拆卸安全阀盖板。
- If you open the cover plate of your cell phone, you'll see a rectangular LCD on its backside. 把手机的盖板打开来,背面就是一整片长方形的液晶萤幕。
- Before installing cover plate, a continuity test should be performed to assure that switches are properly set. 在安装盖板之前,应该进行断路检查测试,以确保开关正确设置。
- Adjust the Mounting Bracket so that the Sensor sits flush against the Cover Plate. 请调整安装架使得感应器与盖板处于合适的位置。
- The comedy tine was cut out as being off side. 笑料由于低级趣味而被删去。
- Fitting 272 has an opening 274 therethrough that communicates with channel 266 and recess 264 in cover plate 262. 管接头272有一通道274经过，连通盖板262上的通道266与凹处264。
- He can reel off the date of the king of england. 他能流畅地说出所有英国国王的生卒年份。
- Slowly open all ball valves to relieve air and water pressure. Loosen bolts on groove coupler and remove groove coupler and cover plate from valve body. 慢慢开启所有球阀，释放空气和水压力。松懈沟槽状联结器上的螺栓，从阀体上拆卸沟槽状联结器和阀盖板。
- Slowly open all ball valves to relieve air and water pressure. Loosen bolts on groove coupler and remove groove couple and cover plate from valve body. 慢慢开启所有球阀,释放空气和水的压力。松开沟槽连接器上的螺栓,从阀体上拆卸沟槽连接器和盖板。
- Is it a part- tine job you are after? 你要找的是不是非全日性的工作？
- Cover plate 262 includes outwardly extending lugs 278 that are dimensioned to be in registry with lugs 258 on valve body 212. 盖板262也含有向外凸出的柄座(lug)278来接上阀体212上的柄座258。
- He recited the whole of The Ancient Mariner to us off the reel. 他一口气把《古水手吟》从头到尾都背诵出来了。
- In this respect, cover plate 262 has a planar surface 276 dimensioned to mate with planar surface 234 of valve body 212. 就这方面来说，盖板262有一平面276设计成能与阀体212上的平面234密合。
- reel tine the body 拨禾轮齿倾斜度
