您要查找的是不是:
- How does the supplier control resin content? 如何控制树脂砂含量?
- The article describes the control of resin content and GRP product quality. 本文叙述了手糊玻璃钢制品的含胶量控制与质量的关系。
- The steadiness of resin content in prepreg is the key factor to ensare the quality of the finished compos-ite. 预浸带的树脂含量稳定性是保证复合材料制品质量的重要因素。
- Single face corrugated machine speed slow increases Corrugating cord to peak cohniiand resin content. 单面瓦楞机车速过慢,会增大瓦楞楞峰的着胶量。
- But for the tolerance of the prepreg resin content, the prepreg made by the hot-melt method was... 在复合材料常规力学性能方面,一般前者高于后者。
- But the Spriner's models and the code can not calculate the resin content and the void content, and can not select the curing process parament overall. 但该模型无法计 算复合材料的树脂含量、孔隙含量、也无法全面的选择固化工艺参数 。
- Furthermore, the resin content shall not be less than 35 % by volume, and there shall be adequate adhesiveness at working temperature. 此外,树脂含量体积分数应不少于35%25,而且在工作温度要有足够的粘合性。
- The crystallinity reach its peak when the content of epoxy is 1%, with the increase of epoxy resin content, the crystallinity of nylon 11 alloy decreases. 环氧树脂用量为1%25时,尼龙11共混合金体系的结晶度最大,此后随着环氧树脂的加入,尼龙11结晶度随之降低。
- Definitions and inspection methods are given for main performance indexes of resin impregnated paper resin content, volatile content, resin flow and precuring degree. 介绍了浸渍纸的浸胶量、挥发物含量、流展、预固化度等主要性能指标的概念及其检测方法;
- According to the experience of dispensing drugs for their Aloeswood resin content to be more than 25% (generally up to the standards of water Aloeswood). 据经验适合用药配药之沉香其树脂的含量必须超过25%25(一般水沉香可达此标准)。
- It can not only measure the prepreg's resin content accurately and sensitively,but alsoautomatically adjust the process parmeters,assuring uniform resin distribion. 该系统能够跟踪预浸过程,准确、灵敏地反映树脂含量的变化,并能根据要求及时调整工艺参数,保证预浸料树脂均匀分布,有利于工艺过程的连续化、自动化。
- In view of the fact that the density of existing domestic medium density fiberboard is relativelyhigh, a study on preparing UL-MDF by increasing resin content was made. 针对中密度纤维板存在密度偏高的问题,通过提高施胶量,降低了制品密度。
- Influential mechanism of single factor such as PF resin content,curing time on conducting property and mechanical property was analyzed for graphite matrix composite. 首先进行单因素试验分析了酚醛树脂含量、固化时间对复合材料导电性能与力学性能的影响机理;
- Contact molding compression of design and the same calls on cots, ensure that the pressure stability, to facilitate uniform and dvysocket resin content. 触压棒压片设计与上胶辊相同的弧度,确保压力稳定,着糊均匀和便于控制胶量。
- The analysis of fluorocarbon resin content in fluorocarbon lacquer by using oxygen bomb burning method with fluorin ion electrode are discussed in detail. 摘要采用氧弹燃烧法配合氟离子电极对有机浓剂型和水溶性氟碳漆中氟碳树脂含量的分析方法进行了研究。
- Alder Birch and Mono Maple wood were impregnated with ME, UF, MUF resin and the relationships among the resin kind, resin content, impregnating conditions and dimensional stability of the modified wood were approached. 以西南桦和械木为研究对象,探索不同种类的热固性树脂和不同浸注条件与树脂浸入量和改性材尺寸稳定性的关系。
- Gelatinize is contained in a plastic box with a root drive steel roll through rotation with adhesive in moving about prbroin, resin content control by a fall in steel roller blades of steel. 涂胶量是通过装在胶盒里的一根传动钢辊经转动带胶涂在走动的膜上,胶量的控制是靠一落在钢辊上的钢制刀片来控制的。
- Teaching content should be concise. 教学内容要少而精。
- The basin is made of synthetic resin. 这个盆是用合成树脂做的。