您要查找的是不是：
- All needle valves must be closed on test kit. 检测组件上的所有针形阀必须关闭。
- Check the acidity of the soil with a test kit. 用试验器具测一下土壤的酸度。
- Rock dust on the green felt, cowboy ballads on the jukebox. 石头的灰尘布满了绿色地毯，而牛仔民谣则在点唱机里播放着。
- For digital printout model test kit, request F-TK-DL. 适用于数字打印输出型号的检测组件，请参阅F-TK-DL.
- Before starting test, all needle valves on test kit must be closed. 在开始检测前,检测组件上的所有针形阀都必须关闭。
- Checking the mud test equipment in the pilot test kit. 检查仪器箱中的泥浆试验设备。
- Turn test kit on, wait until self check is complete. 打开检测组件,等到自测完成为止。
- Open test cock No. 1 and bleed valve "A" on top of test kit. 开启测试旋塞1号和检测组件顶部上的排气阀“A”。
- After fumes and rock dust have settled, the rock brought down by the explosion is removed, often on conveyor belts. 等硝烟和尘埃散尽后，再将炸下的岩土运出去，通常是用传送带。
- Open bleed valve "A" on top of test kit and bleed air from hose. 开启检测组件顶部的排气阀“A”，并且从软管排放空气。
- Before starting test, all needle valves on the test kit must be closed. 在开始检测之前,检测组件上的所有针形阀必须关闭。
- The reliable, validated diagnostic test kit for detection of crops is the key! 简便,快速,有效的检测试剂是成为关键!
- Usage: Homogeneous gushing pushes the product to the map, dust or the wiper is listed in, the ability, cleaning greatly, improving whose adsorption and collecting dust complete, tap or rock dust to push he dust come off. 用法：把本品均匀的喷到拖把、推或擦布上，大大提高其吸附及收集灰尘能力，清洁完后，轻敲或摇动尘推，灰尘即可脱落。
- Install hose between test cock and connection "A" high side (red) of test kit. 在测试旋塞和检测组件的连接“A”高端（红）之间安装软管。
- ECB can be made of a test kit for detecting the samples containing alcohol. 可实现乙醇的微量化、快速化测定; ECB可制成荧光毛细乙醇测试盒,用于含乙醇样品的测定。
- Open test cock No. 2 and needle valve "A" high side (red) on test kit. 开启测试旋塞2号和检测组件上的针形阀“A”高端（红）。
- Quality standard of rock dust used in coal mines 防爆用岩粉质量标准
- Bleed hose and test kit of air, when bleeding hose fill vent with water, shut off VA. 排放软管和检测组件内的空气，在排放软管空气时用水注入排气口，关闭阀门A。
- Caution: To prevent freezing, hold Test Kit vertically to drain differential gauge and hoses prior to placing in case. 警告:为了防止冰冻,在进行安置前,要保持检测组件与排泄差压表和软管垂直。
- Note: After test, all valves on test kit must be fully open and hose removed to prevent damage to test kit. 注:检测后,测试组件上的所有阀门都必须出于全开状态,并拆卸所有软管,以防止测试组件损坏。
