您要查找的是不是：
- roller bend test 辊承弯曲试验,滚压弯曲试验
- It also describes the development of heat roller bend forming technique abroad. 还就因外加热辊弯成型技术的发展作了评述。
- A bend test is a simple test for ductility that does not require special equipment, or a specially shaped test-piece. 弯曲试验是测试韧性的简单试验，不要求特别的测试设备，或规定形状的试样。
- The adhesive force between the coating and the magnesium substrate has been estimated by using bend test,file test,and scribe test. 采用弯曲法、锉刀实验法和划线划格实验3种镀层结合力测试方法;对化学镀镍层与镁合金基体之间结合力的优劣进行了定性评价.
- On purpose to study bend properties of amorphous thin ribbons, a bend test method is given and a laboratory equipment has been established. 为研究非晶薄带的弯曲特性,本文给出了非晶薄带弯曲试验方法,并且建立了实验设备。
- The adhesive force between the coating and the magnesium substrate has been estimated by using bend test, file test, and scribe test. 采用弯曲法、锉刀实验法和划线划格实验3种镀层结合力测试方法，对化学镀镍层与镁合金基体之间结合力的优劣进行了定性评价。
- Heat Roller Bend Forming Technique 加热辊弯成型技术
- The results show that,in the mechanical bend fatigue test and three point bend test,the underfill material of U1 and U2 both can improve the mechanical bend reliability of BGA assemblies,and U1 material performs better. 结果发现在机械弯曲可靠性试验中,U1、U2材料的填充均能提高焊点的机械弯曲可靠性,并且U1的效果更好。
- The results of these simulation have a great meaning for the optimize design of the bendable roller bending equipment and sheet forming process in practice. 模拟的结果对可弯曲辊卷板成形设备的优化设计以及实际板材成形过程都有重要意义。
- The examples said the formula is closer to reality than that given by API and IADC,and said also the casing bend testing need do further. 算例表明，该公式比API和IADC推荐的公式更接近实际，也表明此问题还需做进一步的试验研究。
- Abstract The paper introduces the method and procedure of using ADS technology to combine design calculation and parametric plotting as one unit during designing the roller bending machine. 介绍了应用ADS技术在卷板机设计中有关设计计算与参数化绘图融为一体的方法和步骤。
- Cause of Crack on Surface of Plate during Bend Test 钢板弯曲试验后出现裂纹的原因
- A simple test will show if this is real gold. 简单的试验就能证明这是否是真金。
- Method of bend test for stud welds 螺柱焊接的弯曲测试方法
- The structure,cold bending fraction pattern and EXD of Q235 plate cold bending test sample of Shanghai Meishan Company are analyzed. 对梅山公司Q235冷弯不合格试样进行了金相组织、冷弯断口形貌及能谱分析。
- The flexural strength of all FRC posts was tested with a 3-point bending test. 三点挠曲实验比较不同弯曲度的FRC弯钉与FRC直钉的挠曲强度和挠曲模量。
- Application: Road profile rotating bending test on wheel hubs with simulation of wheel load and lateral forces. 应用范围：公路概况与旋转弯曲载荷和车轮的侧向力轮毂模拟试验。
- The stream takes a sudden bend to the east. 小溪突然转向东流。
- Furthmore, EFPI and FBG sensors embedded inside FOSL are performed by using the four-point bending test. 在此基础上，对FOSL试件中的EFPI和FBG传感器进行了四点弯曲试验。
- hydraulic roller bending servo control system 液压弯辊伺服控制
