您要查找的是不是:
- In respect to the rolling characteristics of cool rolling machine and the rolling theory,this paper adopts linear approximation to set up a rolling force model. 轧制压力的大小,除了与钢种的变形抗力有关之外,还与变形时的受力方式、轧件形状尺寸和摩擦条件有关。
- The traditional rolling force model of 4-stand tandem cold strip mill at Anshan Iron and Steel Corporation was analyzed, and some defects were found out. 分析了鞍钢冷轧厂4机架冷连轧机轧制力模型,指出了其存在的主要缺陷,并提出了改进方案。
- The calculated results show good agreement with the measured data, and the speed is high, which prove that the model can be used as a presetting roll force model for cold strip temper rolling mill. 轧制力计算值与实测值吻合精度高,计算速度快,表明,本模型可以用作平整轧机的轧制力设定模型。
- STUDY OF ROLLING FORCE MODEL ON HOT STRIP MILL 热连轧带钢压力数学模型及其建模方法研究
- IMPROVEMENT ON THE ROLLING FORCE MODEL OF THE SKIN PASS MILL 平整机轧制压力模型的改进
- Research on rolling force model about Baosteel 2050 hot skin mill 宝钢2050热轧平整机轧制压力模型的研究
- RESEARCH ON A ROLLING FORCE MODEL FOR TANDEM COLD STRIP MILL 串列式冷连轧机轧制力模型研究
- RESEARCH ON THE ROLLING FORCE MODEL IN STRIP LEVELING 薄带平整轧制时轧制压力模型的研究
- Force Model of Large Sized Rolling. 大型卷板机的力学模型。
- Research on Rolling Force Model for 1580 Hot Skin Pass Mill at Baosteel 宝钢1580热轧两辊平整机轧制力计算模型的研究
- Rolling Force Models of Cold Tandem Rolling Mill Based 基于遗传神经网络的冷连轧机轧制压力模型
- Rolling force models of middle-thick plate rolling mill 中厚板轧机的轧制压力模型
- Improvement in Setting Accuracy of Rolling Force Model During Process Control of Cold Rolling 提高冷轧过程控制轧制力模型的设定精度
- On the Model of Prediction Temperature and Rolling Force Model in Splitting Caliber for Continuous Rolling Steel Angles 角钢连轧温度预报与切分孔轧制力模型
- The pivotal factor of predicting rolling force is flow stress. 影响轧制力的主要因素是材料的流动应力。
- rolling force model 轧制力模型
- Predict the stress state coefficient by neural network model, it can improve the precision of rolling force. 采用神经网络模型对应力状态系数进行预报,可提高轧制力的预报精度。
- For thin strip, rolling force change easily destroys the final strip shape. 轧制力的变化更容易导致薄规格产品产生板形不良。
- In order to improve the precision of the model, a new method using self adaption and artificial neural networks to predict rolling force was developed. 为了提高中厚板轧机轧制力的预报精度,采用轧制力模型自适应与人工神经元网络相结合的方法进行中厚板轧制力的在线预报。
- In order to improve the precision of the model,a new method using self adaption and artificial neural networks to predict rolling force was developed. 为了提高中厚板轧机轧制力的预报精度,采用轧制力模型自适应与人工神经元网络相结合的方法进行中厚板轧制力的在线预报。