您要查找的是不是:
- The former afterheat utilizing system generates electricity by burning oil to super-heat saturated steam and drive the steam turbine or depressurizing throu gh a decompressor. 金隆铜业有限公司原余热利用系统采用燃油在过热炉中将饱和蒸汽过热后,再由多级汽轮机发电,或者采用减压阀减压。
- Research of a States Monitoring and Fault Diagnosis System for Saturated Steam Turbine 饱和汽轮机状态监测及故障诊断系统研究
- Research on Dynamic Behavior of Load Rejection Process for Saturated Steam Turbine Considering Flash Evaporation of Water Film 考虑水膜闪蒸的核电汽轮机甩负荷动态特性的研究
- saturated steam turbine 饱和蒸汽汽轮机
- Development of Saturation Steam Back Pressure Small Steam Turbine 饱和蒸汽背压式小型汽轮机的开发
- Measured wetness of saturated steam plays an important role in the thermal efficiency and safety of condensing turbine. 湿蒸汽参数的准确测量,对汽轮机的经济性和安全性具有重大意义。
- Cause Analysis of Cracks in Steam Turbine. 汽轮机转子裂纹原因分析及运行安全措施。
- QINGDAO JIENENG STEAM TURBINE CO., LTD. 青岛捷能汽轮机股份有限公司。
- Steam is superheated by being heated above the temperature of saturated steam. 蒸汽被加热到饱和蒸汽的温度以上使之过热。
- In a steam turbine, steam from pipes is directed onto the blades. 涡轮机内的蒸汽从管内导至叶片上。
- Standard pressure settings for saturated steam service are 5 through 15 psig. 对于饱和蒸汽系统来说,标准的压力设置是5至15 psig。
- Forecast of Market Development for Industrial Steam Turbine. 工业汽轮机市场需求结构与预测。
- Saturated steam at superheater continue endothermic become superheated steam. 饱和蒸汽在过热器中继续吸热,成为过热蒸汽。
- The steam turbine is less economical at cruising speed. 汽轮机的巡航经济性较差。
- DEH is the model form of modern steam turbine control system . 数字电液控制系统DEH(Digital Electro-Hydraulic Control System)是现代汽轮机控制系统的典型形式。
- The TG70 steam turbine has a operation speed of9600 rotations per minute( RPM). TG70型蒸汽透平的运转速度为每分钟9600转。
- And make use of the water of saturated steam make a steady polymer in the spore to hydrolyze. 并利用饱和蒸气中的水分使芽孢中稳定的聚合物(钙)水解。
- Discussion on theChoice of High Temperature Bolt Material for steam Turbine. 再论汽轮机高温螺栓材料的选择。
- The structure alteration of the lignin treated with saturated steam is more than that heated in dry condition. 与用水蒸气加热处理相比,在干燥条件下加热后木素结构变化相对较小。
- Optimization Model of Life-time Management for large Steam Turbine Units. 大型汽轮机组的优化寿命管理模式。