您要查找的是不是：
- selecteve laser sintering 选择性激光烧结成型
- Using methods like electron beam melting or selective laser sintering. 使用方法如电子束熔炼或选择性激光烧结。
- Preheating is an important technology in Selective Laser Sintering (SLS). 摘要预热是选区激光烧结成型工艺的重要部分。
- A series of experiments were carried out with direct metal laser sintering (DMLS) for the 316 stainless steel powders. 摘要采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列烧结实验。
- The blended powder of nylon 12 and wollastonite was molded by selective laser sintering (SLS). 摘要将尼龙12与硅灰石的混合粉末进行选择性激光烧结成型。
- After Selective Laser Sintering and debinding and pre-sintering,the Mo powder form loose metallic skeletons. 钼金属粉末经过选择性激光烧结、脱脂预烧结后形成疏松结构的金属骨架。
- A series of experiments were carried out on Direct Metal Laser Sintering(DMLS) of 316 stainless steel powder. 采用直接金属激光烧结的方法,对316不锈钢粉末进行了一系列激光烧结实验。
- The laser sintering parameter was optimized successfully according to exported results. 根据输出结果成功进行激光烧结工艺参数优化。
- Selective laser sintering of foundry silica sands was investigated by experiments. 对铸造硅砂的选择性激光烧结进行了试验研究。
- The path of laser scanning is one of the key tec hn ologies in selective laser sintering (SLS). 激光扫描路径是选择性激光烧结系统(SLS)的关键技术之一。
- Spheroidization is an extraordinary adverse factor for direct metal laser sintering of metal powder. 在金属粉末直接激光烧结成形时,球化效应是一个非常不利的因素。
- Selective Laser Sintering (SLS) is a technology based on the combination of traditional RP and laser. 选择性激光烧结(SLS)成型是一种传统快速成型和激光技术相结合的成型工艺。
- Considering the melting point and the hardness, SW-1 may be the proper laser sintering material in the field of Maxillofacial Prosthetics. SW-1与现有隆源激光烧结成型蜡相比,熔点与硬度有很大降低,而与常用型红蜡片接近,有应用于颌面缺损修复领域的可能性。
- It is the precondition of rapid casting process to select polymer material that meet the case of both laser sintering and casting process. 选择既适合激光烧结工艺又满足铸造要求的高分子材料是快速铸造工艺的前提。
- Christoph Ader, ”Direct Laser Sintering of Ceramic State of the Art report”, Fraunhofer Institut Produktionstechnologie., 2002. 范光照、章明、姚宏宗、许智钦、郑正元，逆向工程技术及应用，高立图书有限公司，2003年。
- Selective laser sintering (SLS) is one of the most attentive rapid prototyping techniques due to its suitability to process almost any power materials. 在产品快速多变,竞争空前激烈的经济全球化时代,选区激光烧结的快速成型技术越来越受到人们的关注。
- According to beam properties of the CO2 laser in the laboratory and light spot requirement for laser sintering, a set of laser beam homogenizing equipment is designed in this. 针对实验室用大功率CO2激光的光束特性和烧结陶瓷实验时对光斑的特定要求,本研究从理论设计了一套激光均束装置。
- The process of rapid manufacturing cast parts, which combines laminated object manufacturing(LOM) and selective laser sintering(SLS) with precision casting, is introduced. 介绍了薄材叠层和粉末烧结激光快速成形技术和精密铸造相结合,快速制作铸件的过程和工艺。
- Objective To evaluate the melting point and hardness of a novel wax formed by laser sintering technology(SW-1) for the restoration of maxillofacial defects. 目的:检测新型激光烧结成型蜡质材料(SW-1)的熔点与硬度,并与现有激光烧结成型蜡及临床常用牙科基板蜡比较,评价其应用到颌面缺损修复领域的可行性。
- Wang Yan,Shi Yusheng,Huang Shuhuai.Structure and properties of PA12/rectorite composite prepared by selective laser sintering[J].Acta Materiae Compositae Sinica,2005,22(2):52-56. [1]汪艳;史玉升;黄树槐.;激光烧结尼龙12/ 累托石复合材料的结构与性能[J]
