您要查找的是不是：
- serial data handshaking 串行数据交换
- The procedure of converting serial data into parallel data. 将串行数据转换为并行数据的过程或方法。
- USB employs NRZI data encoding to transmit USB serial data. USB串行数据采用了NRZI编码,在USB数据线上传输。
- The GCM communicates with the PCCI control over a serial data link. GCM与PCC通过串行数据连接。
- A serial data output permits cascading of multiple devices in applications requiring additional drive lines. 串行数据输出允许在需要附加驱动线路的应用中进行多器件级联。
- CMOS serial data outputs permit cascading for applications requiring additional drive lines. CMOS串行数据输出允许在需要附加驱动线路的应用中使用级联。
- A CMOS serial data output permits cascade connections in applications requiring additional drive lines. CMOS串行数据输出允许需要附加驱动线路的应用的级联连接。
- A CMOS serial data output permits cascading between multiple devices in applications requiring additional drive lines. CMOS串行数据输出允许需要附加驱动线路的应用中多器件间的级联。
- The 2-wire interface is a widely used Master, multi-slave protocol using a serial clock (SCL) and a serial data line (SDA). 此2线接口是一个广泛使用的主机、使用串行时钟（SCL）和串行数据线（SDA）的多从机协议。
- DIU receives and sends serial data. C/DSU changes the format of serial data and matches the physical data link. DIU完成据串行接口的功能,C/DSU完成数据帧传输的格式转换和链路匹配的功能,同时实现了端口的复用和扩展。
- This paper intraduces a software method for detecting the hardware protocol(baud rate,data bits,ets)of serial data transfer. 介绍了一种用软件侦测串口底层协议 (波特率、数据位等 )的方法。
- Baud Rate The speed of data transmission in serial data communications approximately equal to the number of code elements (bits) per second (BPS). 波特率串行数据传输速率，约等于每秒钟传输的比特数。
- R232 serial protocol understanding, know how to read serial data, send data to the serial port. 串口R232协议的了解;懂得如何读取串口的数据;发送数据到串口.
- A large number of A6280s can be daisy chained together and controlled by just four control signals (clock, serial data, latch, and output enable). 多个A6280可以最佳方式装链在一起,由四个控制信号(时钟、串行数据、锁存和有效输出)控制。
- A pulse decoded modulation (PCM) circuit was designed by the use of external clock input of serial data output of analog-to-digital converter. 设计了脉冲编码调制(PCM)线路.;利用模数转换芯片的外部时钟输入及串行数据输出。
- The communication of CAN firstly needs both sides to match the BUS baud rate,so that serial data can be transmitted and received on CAN BUS. CAN通信首先需要双方匹配总线波特率,这样就可以在CAN总线上发送和接收串行数据。
- Serial ATA is a kind of ATA that is totally different from parellel ATA and it is well known for its serial data transmission. Serial ATA即串行ATA是一种完全不同于并行ATA的新型硬盘接口类型,由于采用串行方式传输数据而知名。
- When serial communication mode is adopted for time correction,interruptions are applied for receiving /sending serial data of date / time information. 采用串行通信方式授时,串行数据的收/发均采用中断方式,能提供日期和时间信息;
- The2- wire interface is a widely used Master, multi-slave protocol using a serial clock( SCL) and a serial data line( SDA). 此2线接口是一个广泛使用的主机、用串行时钟（CL）串行数据线（da）多从机协议。
- In 1979, the ISO agreed on HDLC as a standard bit-oriented data link layer protocol that encapsulates data on synchronous serial data links. 1979年国际标准化组织（ISO）同意高阶资料连结控制（HDLC）成为一个标准化位元导向资料连结层协定，在同步的串列资料连结上封装资料。
