您要查找的是不是:
- SLIP Serial Link Interface Protocol 串行链路接口协议
- serial link interface protocol 串行链路接口协议
- LI = link interface TN916 board. li = 链路接口 TN916 板。
- The serial link communicates with the TRE modules for testing. 串行链路沟通与tre模块进行测试。
- Link Interface Type = the link interface board type. Link Interface type = 链路接口板类型。
- Q: Why don't I see OSPF neighbors as FULL/DR or FULL/BDR on my serial link? 问:为什么我看不到的OSPF邻为伴,充分/博士或全职/ bdr对我的串行链路?
- At last, this article analyzes the design of broadband V5 interface protocol. 最后本文分析了宽带V5协议接口(VB5接口)的设计。
- Encryption Status = whether the Link Interface (LI) pack is encrypted. Encryption Status = 是否对链路接口 (LI) 包加密。
- compressed serial link Internet protocol 压缩串行链接的因特网协议
- SLIP Serial Line Interface Protocol 串行线路接口协议
- Universal Serial Interface Protocol(USS) 通用串行接口协议(USS)
- serial peripheral interface protocol 串行外设接口协议
- When configuring serial links using EIGRP, it is important to configure the bandwidth setting on the interface. 当使用EIGRP组态序列线路时,对该介面设定频宽是很重要的。
- Compressed Serial Line Interface Protocol 压缩连续线接口草案
- The TDM switch is used to route downlink time slots containing RSLs coming from the BSC to the NIU processor using serial link TDM_A. 时分多址开关的作用是为包含RSL的下行链路时隙提供路由,这些RSL是通过时分多址接入链路从BSC到达NIU处理器的。
- The DCU also sends monitoring signals back to the monitoring computer via serial link to displays the current operation status. DCU同样也通过串行链路发送检测信号到监控电脑上,以显示现行运行状态。
- RRC lies in the 3rd sublayer of air interface protocol stack,the main function of which is the control and management of radio resource. 无线资源控制(RRC)子层位于空中接口协议栈的第3层,它主要完成无线资源的控制和管理功能。
- RRC lies in the 3 rd sublayer of air interface protocol stack,the main function of which is the control and management of radio resource . 无线资源控制子层位于空中接口协议栈的第3层,它主要完成无线资源的控制和管理功能。
- High level functions like gain, image flip and integration time could be operated through a serial link to minimize the number of electrical interconnections. 可以通过串行链接对增益、图像翻转和积分时间等高级功能进行操控,降低电气对接的数量。
- USB2.0 device controller IP consists of a UTMI (USB Transceiver Macrocell Interface) and a USB interface protocol controller. USB2.;0设备控制器IP核包括UTMI收发器和协议控制器两部分。