您要查找的是不是：
- The paper mainly study interfacial shear stress distribution and influence parameters on the experiment of 16 RC beam strengthened with CFRP. 通过16根CFRP抗弯加固钢筋混凝土梁的试验，主要研究纤维片材端部和裂缝附近的界面剪应力分布规律及其影响因素。
- Finally, as an example, the properties of the shear stress distribution in periodic oscillatory flow of human carotid were discussed. 最后，以人体颈动脉为例，讨论血液周期振荡流的切应力的分布特性。
- The result shows that the normal stress distribution is according to cubic curve and shear stress of the web plate is antisymmetric. 由于短肢剪力墙结构存在剪力滞后效应,结构承载力有所降低。
- shear stress distribution regularities 剪应力分布规律
- lateral shear stress distribution 侧阻力分布
- Discussion on shear stress distribution pattern in the section anchored with anchor rope 锚索锚固段剪应力分布模式探讨
- Fluid Shear Stress Distribution of Periodic Oscillatory Blood Flow in Rigid Circular Tube 刚性圆管中血液周期振荡流的切应力分布
- Keywords cryomechanics;glass-cloth/epoxy laminate;interlaminar shear strength;short beam shear test;shear stress distribution;finite element method; 低温力学;玻璃纤维织物强化树脂层合板;层间剪切强度;短梁剪切试验;剪切应力分布;有限元法;
- Critical resolved shear stress (O’crss). 临界分剪切应力。
- shear stress distribution 剪应力分布
- Shearing Stress Distribution in the Lateral Section for Non-Uniform Beam 变截面梁横截面上的剪应力分布
- The process does not affect the shear stresses. 这样的处理并不影响剪应力。
- Patterns of shear stress may contribute to the focal distribution atherosclerotic lesions. 研究发现，血液流动力的形式与动脉粥样硬化的发生发展有密切的关系。
- The ratio of shear stress and consolidation stress (RSC) follows normal distribution. 砂层的动剪应力比可采用正态分布；
- Finite Element Analysis of Shear Stress Distributions in Intermittent Recessed Single-Lap Joints 单搭接接头断续胶层中应力分布的数值分析
- The interfacial shear stress is a constant proportion of the bottom shear. 交界面的剪力与底部剪力之比是常数。
- Otherwise, the pastes with wide particle distribution have higher yield stress, lower dieland wall shear stress, and paste was easily extruded. 粒度分布较宽的含有细碳化硅的挤压物料具有高的屈服值和低的滑移膜初始剪切应力,使物料在模段内容易实现挤出。
- According to the twin shear stress theory, this paper improves on Duncan Model. 根据双剪应力理论对邓肯模型进行了修正。
- Moreover, the 3D stress distribution is more undulant than the 2D one. 相对而言，三维的应力分布曲线起伏较大。
- Tensile stress and shear stress are transferred by PBL shear connectors. 计算得到钠-混凝土接头的最不利荷载组合内力。
