您要查找的是不是：
- side bend test 侧弯试验
- Is a wedge test specimen utilized for chill or analysis control? 是否用楔型试块进行分析控制?
- A bend test is a simple test for ductility that does not require special equipment, or a specially shaped test-piece. 弯曲试验是测试韧性的简单试验，不要求特别的测试设备，或规定形状的试样。
- The finite element model of a small punch test specimen of 1Cr0.5Mo steel is established. 基于小冲孔蠕变试验 ;建立 1Cr0 .;5Mo耐热钢小冲孔蠕变试样的有限元模型。
- The spectr al reflectance of each test specimen is measured in situ before and after exp osures. 在辐照前后对每一个试样的光谱反射系数进行了原位测量。
- The adhesive force between the coating and the magnesium substrate has been estimated by using bend test,file test,and scribe test. 采用弯曲法、锉刀实验法和划线划格实验3种镀层结合力测试方法;对化学镀镍层与镁合金基体之间结合力的优劣进行了定性评价.
- The test specimen shall be immersed in the measuring electrolyte so that the top edge of the area to be measured is level with the surface. 测试样本应浸在电解液中,并使测量区的顶端与液面持平。
- On purpose to study bend properties of amorphous thin ribbons, a bend test method is given and a laboratory equipment has been established. 为研究非晶薄带的弯曲特性,本文给出了非晶薄带弯曲试验方法,并且建立了实验设备。
- The test specimen may be titrated with the Reagent directly, or the analysis may be carried out by a residual titration procedure. 待测样品可能会被卡尔试剂直接滴定，或者采用回滴定法完成分析。
- The adhesive force between the coating and the magnesium substrate has been estimated by using bend test, file test, and scribe test. 采用弯曲法、锉刀实验法和划线划格实验3种镀层结合力测试方法，对化学镀镍层与镁合金基体之间结合力的优劣进行了定性评价。
- Although only then several millimeters are long, but each test specimen includes several thousands has not grown the complete egg. 虽然只有几毫米长，但每个试样含有数千未发育完全卵子。
- Report the viscometer model and spindle, the apparent viscosity at the spindle/speed used, and the test specimen temperature. 记录粘度和锭子，外观的粘度在锭子/和使用的速度，还有测试样品的温度。
- The measuring objectives are selected software controlled in dependence of the test specimen parameters, must be inserted however manually into the mount. 由软件选择样品被测参数,被测物必须用手装入装配台。
- Control of Side Bend of Prestressed Concrete Beam 预应力混凝土梁侧弯的控制措施
- In the second part, a test program to help improve modeling of SCBF systems is described, including the design of a nearly full-size, two-story SCBF test specimen. 在文章的第二部分描述了一个帮助轴心抗拉构件改进建模的实验程序。这部分包括一个接近实际大小的两层轴心抗拉构件的实验范例。
- To produce a pre-determined depth of angle for different impact test specimen material, this device has double thickness gauges and speed adjustor for depth measurement. 简介制作冲击试验机试片之缺口用,本机可调整切口之深度并附良测之设备,本机具切削速度调整可视材料之软硬等状况调整切削速度。
- Forward bends, side bends, and backbends bring relief, but twists really get to the core of your tension. 这里有一个简单的方法来学习，在逐步的扭转中拉长和放松上半身。骨盆和后背部靠墙交叉腿简易坐。
- Used the gold, analysis test method and so on XRD, TEM agglutinates the after test specimen to the vacuum to carry on the microscopic organization analysis. 采用金相、XRD、TEM等分析测试方法对真空烧结后的试样进行了微观组织分析。
- The results show that,in the mechanical bend fatigue test and three point bend test,the underfill material of U1 and U2 both can improve the mechanical bend reliability of BGA assemblies,and U1 material performs better. 结果发现在机械弯曲可靠性试验中,U1、U2材料的填充均能提高焊点的机械弯曲可靠性,并且U1的效果更好。
- The examples said the formula is closer to reality than that given by API and IADC,and said also the casing bend testing need do further. 算例表明，该公式比API和IADC推荐的公式更接近实际，也表明此问题还需做进一步的试验研究。
