您要查找的是不是：
- Signaling link management function LT 信令链路管理功能
- signaling link management functions 信令链路管理功能
- signaling link management 信令链路管理
- Signaling Link Code = the member number within a link set. Signaling Link Code = 链路群内的成员号。
- Signaling Link Code--he member number within a link set. Signaling Link Code -- 链路群内的成员号。
- The article analyzes GMPLS, including the label, the layered LSP, routing and addressing, signaling and link management etc.At last the paper generalizes the meaning of GMPLS. 对GMPLS的标签、层次化LSP、路由与寻址、信令和链路管理等方面加以分析,最后对GMPLS的意义进行了概括。
- The CHG:SLK command is used to change the minor state of a signaling link. CHG:SLK 命令用于更改信令链路的次级状态。
- Major State of Link = the major equipage status of the signaling link. Major State of Link = 该信令链路的主要设备状态。
- The device routes or switches incoming messages to an outgoing signaling link using routing information within the multitiered SS7 message. 该装置为利用多层七号信令报文中的路由信息，为进来的报文送到输出的信令链路上建立路由或进行交换。
- This state Indicates that the AP-DS1 is available for use by an RCS signaling link. 该状态表明 AP-DS1 可供 RCS 信令链路使用。
- Link Node Address (Group and Member) = the node within the IMS ring on which the signaling link terminates. 链路节点地址 (Group and Member) = IMS 环路内信令链路终止的节点。
- Signaling links are usually equipped in pairs in SS7 networks. 信令链路常常是成对地装配在 SS7 网络中。
- IETF RFC 4209-2005,Link Management Protocol (LMP) for Dense Wavelength Division Multiplexing (DWDM) Optical Line Systems[S]. 黄照祥;雷蕾;梁庄.;光网络第三代传送系统[M]
- Signal unit initial alignment - invokes initial alignment prior to activating or restoring a signaling link. 信令单元初始定位 -- 在激活或恢复信令链路之前调用初始定位。
- Then, deeply studys the process of agricultural mechanization information resources" flow, and proposes whole distance management and core link management. 一是根据农业机械化信息资源流动中各个阶段的特点进行核心环节管理。
- The s7ln form (SS7 link) is used to define the individual SS7 signaling links. s7ln 表(SS7 链路)是用于定义各 SS7 信令链路。
- Far-End CLLI = the Common Language Location Identifier (CLLI) that is associated with the STP or 5ESS DCS at the far end of this signaling link. Far-End CLLI = 与该信令链路远端处的 STP 或 5ESS DCS 相关的公用语言位置标识符 (CLLI)。
- Each signaling link may accommodate a traffic load of approximately 40 percent of its maximum load capacity. 每一信令链路可容纳其接近最大负载能力 40%25 的话务量。
- Major State of Link-this field contains the major equipage status of the signaling link. Major State of Link -- 该信令链路的主要设备状态。
- Far-End Point Code = the point code of the SS7 application at the far end of this signaling link. Far-End Point code = 该信令链路远端 SS7 应用程序的点编码。
