该词条未找到_海词词典

您要查找的是不是：

The velocity field in blown film die was simulated by FEM method. 用有限元法对吹膜机头内熔体流动的速度场进行了模拟。
The temperature field of the bar in and out the deformation zone during rolling is simulated by FEM. 采用有限元方法分析了棒材连续热轧中变形区及出变形区时轧件横断面温度场。
A new type of tube expended fixture was designed , the deformation of the tube plate was simulated by FEM . 设计了新型通用辘管工装夹具,并用有限元法模拟了管板变形的应力状况。
In order to investigate the superplasticity of ceramic matrix laminated composite, the superplastic deep-drawing process was simulated by FEM. 为研究陶瓷基层状复合材料的超塑性能,对其超塑拉深成形过程进行了有限元模拟。
The predeformation process to decrease welding deformation is simulated by FEM and the method to determine predeformation value is given.The final deformation after welding is predicted. 利用有限元方法对预变形法减小焊接变形进行了模拟,给出了确定预变形大小的方法,并对最终的焊接变形进行预测。
The residual stress of the heryllium ring weldment was studied by FEM simulation and X-ray stress measurement. 采用有限元分析法和X射线应力测试法对铍环形焊件的残余应力分布规律进行了研究。
The simulation of roll forming with multiple passes was studied by FEM software ABAQUS. 利用ABAQUS软件对多道次辊弯成形数值模拟技术进行了研究。
It is shown that the stamping forming process can be analyzed by FEM simulation. 动态仿真技术可准确地分析覆盖件的冲压成形过程。
The thesis is based on the rheology and hydrokinetics of the polymer melt,and calculates the velocity in the die by FEM simulation,and provides die design with theory proof. 本论文中功能块结构的研究，是以熔体的流变性以及流体动力学理论基础上，对在口模中的熔体进行数值模拟，计算出熔体在口模中的流动参数(主要是速度的分布)，从而可以科学的对功能块几何结构进行优化。
Numerical simulation show that the results by CFM agree with those by FEM, and are much more accurate than those by PPM. 仿真结果表明 ,悬臂梁模型与有限元模型具有较高的一致性 ,它比简支梁模型更准确
On the basis of the rigid viscoplastic FEM theory, a surface defect prediction method for the plastic forming process by FEM numerical simulation has been thoroughly studied. 摘要基于刚粘塑性有限元基本理论，本文深入地研讨了通过有限元数值模拟来预测塑性成形问题中一类表面缺陷生成的方法。
ADMP is a keyword to simulation by mechanism dynamics using G03. 指定经典轨道轨迹计算，使用原子中心密度矩阵传播的分子动力学模型。
simulation by FEM 有限元模拟
An example is given which is simulated by DEFORM. 并利用DEFORM软件给出了实例。
The deformation of cone-box shaped part in hydromechanical deep drawing is simulated by the FEM software ANSYS. 摘要利用大型有限元分析软件ANSYS对锥盒形件充液拉深的成形过程进行了数值模拟。
The biomechanical effect study of maxillary anchorage molar and its periodentium by FEM. 三维有限元法分析上颌支抗磨牙及其支持组织的生物力学
Based on those researches, the behavior of the dam in the whole process is simulated by 3-D FEM. 在此基础上，采用三维有限元法对该拱坝进行了全过程应力仿真计算。
Energy release rate of interface debonding in ceramic composites is caculated by FEM. 用有限元法计算了陶瓷基复合材料界面脱粘的能量释放率。
The hammer forging process of TC6 titanium alloy clasp has been simulated by using rigid-viscoplastic FEM. 在TC6钛合金卡环的高温锤锻过程中,模具承受非常大的应力。
The solidification process of liquid metal in the CASTEX technique was studied by FEM(finite element method). 利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。