您要查找的是不是:
- size reduction ratio 破碎比
- Click the File Size Reduction tab. 单击“文件大小缩减”选项卡。
- High reduction ratio during primary and secondary crushing stage. 初段,二段等各段破碎均有大破碎比。
- A Comparison of Studies of Class Size Reduction in China and the U. S. 关于中美两国小班化教育研究的比较。
- The inspiratory expiratory value difference (VD) and area reduction ratio (AR) of bilateral lungs were calculated. 结果各年龄组内男女之间的VD和AR无显著性差异;
- Size reduction of hot and cold sinter with high machine availability, high capacity and at low operating costs. 您的要求:高产量,低成本地破碎热烧结矿和冷烧结矿。
- In dot etching, the photographic construction of individual dots to provide a proper density gradient suitable for dot size reduction. 中义在网点修整中,个别的网点结构依网点大小提供适当的浓度变化。
- Through the comparison of numerical simulation value and experiment results, the range of reduction ratio was obtained while the tube forming ideality. 通过数值模拟与实验结果的比较,得出了获得较理想的成形薄壁筒形件时减薄率的选取范围。
- It is used in the microwave integrated circuits to achieve size reduction and rejection of ripples in stopband. 用在微波集成电路中,可以减小电路尺寸和抑制阻带内波纹。
- It is found that the tensile strength and the hardness of the specimen decrease, while the elongation and the reduction ratio of area increase. 在平行试样方向上施加强磁场进行退火处理后,球铁的拉伸强度、硬度降低,延伸率、断面收缩率升高。
- This window size reduction provides the receiving host less bytes to process from its buffers before more data arrives. 降低视窗大小是希望当更多资料到达前,接收主机要处理缓冲区的位元组变少。
- The uneven distribution of the reduction ratio of Mo square bar swaged into the circular bar and the Practice calculation method of reduction ratio were discussed. 讨论了钼方坯旋锻归圆前压缩比的不均匀分布情况及其实际压缩比的计算方法。
- All the masses presented with size reduction with an average of 37% in follow-up CT after 6 months, and the most remarkable size reduction was 60%. 6个月后均有缩小,缩小最显著者为60%25左右,21个病灶平均缩小37%25。
- Results: Morphological changes of matrine on CNE2 cells: cell shrinkage,cell size reduction and turn round,cytoplasmic vacuolar changes. 结果:苦参碱处理后CNE2细胞形态发生改变,细胞皱缩,变小变圆,空泡明显。
- Using lumped mass model, we construct dynamic equation of the flexible arm as well as its Simulink model. Using Simulink model, we analyze how Coulomb friction, motor inertia and reduction ratio of gear affect system performance. 采用集中质量模型建立了柔性手臂的动力学方程及其Simulink模型,利用Simulink模型仿真分析了库仑摩擦力、电机转子惯量和齿轮减速比对系统性能的影响。
- The star cracks in macrostructure appear in some hypo-peritectic continuous cast alloy blooms and these cracks cannot be stock completely by hot rolling reduction ratio, macroetching testing and SEM. 摘要一些亚包晶合金钢连铸大方坯出现低倍星状裂纹,在一定的压缩比下经轧制仍不能完全消除这种低倍缺陷。
- At last, new failure thickness reduction ratio criterion is used to determine the forming limit of St14 steel based on the numerical system, and the prediction are compared with experimental FLD. 最后,在数值模拟中应用不同形式和参数组合的厚度减薄率判据进行成形极限图预测,并与实验结果进行了比较。
- To try and meet these changing demands a lot of new methods have been developed to complement the conventional size reduction machinery such as rotary cutters, planetary and attrition mills. 为了尽力满足需求的变化,发展起来许多新方法来弥补常规的粉碎机械,比如旋转破碎机、行星磨和研磨机的不足之处。
- The star cracks in macrostructure appear in some hypo-peritectic continuous cast alloy blooms and these cracks cannot be stuck completely by hot rolling reduction ratio,macroetching testing and SEM. 一些亚包晶合金钢连铸大方坯出现低倍星状裂纹,在一定的压缩比下经轧制仍不能完全消除这种低倍缺陷。
- They differ in size but not in kind. 这些东西的区别只是大小不同而实质一样。