您要查找的是不是：
- slack adjuster pull rod 间隙调节器拉杆
- Pull rod type slack adjuster 拉杆间隙调整器
- The pull rod is screwed into the inside thread of the anchor head. 将拉杆旋入锚头内的丝扣。
- Mechanical mandrel, axially actuated via machine pull rod. 机械夹紧心轴;通过机床拉杆轴向操纵.
- Aileron servo pull rod should be vertical to the shaft of aileron basically. 副翼舵机拉杆应基本上垂直于副翼转动轴线。
- Described are the analysis of causes to typical troubles in ST 2-direction brake shoe slack adjuster and preventative measures. 介绍了ST型双向闸瓦间隙调整器典型故障的原因分析及其预防措施。
- Below the fuselage----Make and Install Elevator pull rod and collet. 机身下面-升降舵拉杆及夹头的制作与安装。
- In order to improve the antivibration ability of PACKER inner pull rod, it is necessary to analyze its vibration characteristics. 摘要为了提高PACKER内拉杆的抗振能力，进行振动特性分析是十分必要的。
- The main products include: Pull rod case, travel bag, briefcase, computer bag, digital cameras and camera bagging, backpack, ice bag and so on. 主要产品包括：拉杆箱、旅行袋、公文包、电脑袋、数码相机及摄像机套袋、背包、冰袋等。
- Manual Slack Adjuster Test Procedure 手动减速调整器的试验程序
- Took down the spade pole lying above the drive, the spade opened the plank which stops up the door, enter, pull the pull rod, take the companion ladder to go down. 取下位于驱动装置上方的锹杆，锹开堵住门的木板，进入，拉动拉杆，乘坐升降梯下去。
- The improvement of belt conveyor slack adjuster 带式输送机拉紧装置改造
- slack adjuster worm plunger spring 减速调整器蜗杆柱塞弹簧
- Automatic slack adjuster castings and components 自动减弱调节器铸件和零件
- light-single-acting automatic slack adjuster 轻便单向闸瓦间隙自动调整器
- brake slack adjuster fatigue testing equipment 闸调器疲劳试验机
- The relationship of steel slippage to shear stress was obtained using a balance limit theory and a pull rod arch model.The loss in normal section bearing capacity as corrosion proceeds is predicted. 运用极限平衡理论和拉杆拱模型求出钢筋滑移量与剪应力的关系，从而建立了不同锈蚀程度的钢筋混凝土梁正截面承载力预计模型。
- The JV is capable of producing 100,000 pieces of fabricated shoes, automatic slack adjusters and manual slack adjusters at one shift. 具备年产10万件冲焊蹄片、自动调整臂及手动调整臂（单班生产）的生产能力。
- Causes to Bending of the Control Rod of the Automatic Brake Slack Adjuster and Suggestions for Improvement 闸瓦间隙自动调整器控制杆弯曲的原因及改进建议
